[giorgiocat]

Hi all,
I'm trying to fit a chainguide on my 6.6 for double ring setup but I have some difficulty.
I tried the blackspire stinger ( BB mount) but it hits against the lower link.
Do you know any chainguide that fit on this bike?
thanks

 

[Blaster1200]

Most likely, the back plate of the Stinger is hitting the pivot pin. File the back plate of the Stinger as needed to clear the pin.

 

[gravityfreaky]

E13 DRS fits and works very well but will also require a little grinding with a Dremmel to clear the lower pivot. You can use a spacer between the frame and the BB to get some more room there too.

 

[giorgiocat]

E13 DRS fits and works very well but will also require a little grinding with a Dremmel to clear the lower pivot. You can use a spacer between the frame and the BB to get some more room there too.

If I use a spacer between the bb and the frame (bottom bracket shell is 73 mm width and the bottom bracket shell is XT) the chainline changes.

 

[Cable0guy]

need to grind, whether drs or stinger

 

[gravityfreaky]

If you space it out a couple mm you'll clear the C Clip but it'll still need dome grinding to clear the pivot bolt head. Chain line won't suffer as you'll only be using the middle and inner rings with a bash guard. If you were running a bug ring then chain line may be adversely affected.

 

[giorgiocat]

need to grind, whether drs or stinger

It's true. This is my solution: