The best XC frame you could but 2019 from Trek. Note this one have the nicer and expensive Fox Factory Float DPS rear damper.
Large 19;5" fits 178-188cm
I was aiming for an 9.9kg build but my priority's has changed. Trying to sell here on mtbr as ebay don`t allow me as a private person to list stuff over 500eur if I don`t have an active account.
Over 9.7 & 9.8 this one have the rear triangle in carbone, that saves around 100grams. OCLV Mountain Carbon main frame & stays, ABP, Full Floater, EVO link, E2 tapered head tube, Mino Link, MicroTruss, Control Freak internal routing, Carbon Armor, PF92, Boost148 & G2 Geometry on 29ers, 100mm travel.
BB Standard: BB86/BB92, press-fit
Including: 720mm Bontrager XXX, OCLV Carbon, 31.8, zero rise , Bontrager 90mm steam, Remote Lockout twistlock and grips, seat post XXX carbone. Also all the bearings & cable guides you will need. Note that the bike is used since 2019 and therefor some minor scratches. Also the aluminum chain protection behind the crank is glued in place and I would probebly redo that if I was keeping the bike (not an defect just cosmetical). Documents and paper from the purchase in Sweden will be included for 9000eur/ 10000usd (complete xx1 bike)
ICR: länk
Shipping from Sweden to USA cost 95euros / 105Usd + import taxes. I will send with traceable package.
// Mvh Viktor Ragnmark Gothenburg
Large 19;5" fits 178-188cm
I was aiming for an 9.9kg build but my priority's has changed. Trying to sell here on mtbr as ebay don`t allow me as a private person to list stuff over 500eur if I don`t have an active account.
Over 9.7 & 9.8 this one have the rear triangle in carbone, that saves around 100grams. OCLV Mountain Carbon main frame & stays, ABP, Full Floater, EVO link, E2 tapered head tube, Mino Link, MicroTruss, Control Freak internal routing, Carbon Armor, PF92, Boost148 & G2 Geometry on 29ers, 100mm travel.
BB Standard: BB86/BB92, press-fit
Including: 720mm Bontrager XXX, OCLV Carbon, 31.8, zero rise , Bontrager 90mm steam, Remote Lockout twistlock and grips, seat post XXX carbone. Also all the bearings & cable guides you will need. Note that the bike is used since 2019 and therefor some minor scratches. Also the aluminum chain protection behind the crank is glued in place and I would probebly redo that if I was keeping the bike (not an defect just cosmetical). Documents and paper from the purchase in Sweden will be included for 9000eur/ 10000usd (complete xx1 bike)
ICR: länk
Shipping from Sweden to USA cost 95euros / 105Usd + import taxes. I will send with traceable package.
// Mvh Viktor Ragnmark Gothenburg
