Mountain Bike Reviews Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hi all,

Thanks to Jill Hamilton and Haro I have a new Xeon frame ready for assembly but I have been unable to locate the proper torque numbers.

Does anyone know where I might find these specs?

TIA

Mitch
 

·
Registered
Joined
·
1,820 Posts
Thank you...thank you very much...(said in my best Elvis voice) ;)

Here you go:

Sonix/Xeon Bolt Torque Ratings

Upper Links (Sonix)
• Lower Pivot: 130-140 lb-ft
• Connecting Brace: 130-140 lb-ft
• Upper Link Bolt / Shock Mount: 120-130 lb-ft

Upper Links (Xeon)
• Lower Pivot: 130-140 lb-ft
• Connecting Brace: 130-140 lb-ft
• Upper Link Bolt / Shock Mount: 150-160 lb-ft

Bottom Bracket Pivots (Sonix & Xeon)
• Main Pivot (13mm hex socket): 110-120 lb-ft
• Main Pivot (5mm allen): 120-130 lb-ft
• Main Link Bolt: 130-140 lb-ft

Shock Mount (down tube – Sonix & Xeon)
• If 5mm allen key: 110-115 lb-ft
• If 4mm allen key: 90-100 lb-ft
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
Once again, I can;t thank you enough Jill! Haro has bent over backwards for me and I am very grateful to BOTH Haro as a company and you personally.

Today is finally the day!
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #4 ·
One other quick question Jill.

Roman had mentioned the spacers on the BB need to change. Can you tell me where the spacers go? In other words how many spacers go on each side?

TIA
 

·
ride hard take risks
Joined
·
25,423 Posts
Mitch_A said:
One other quick question Jill.

Roman had mentioned the spacers on the BB need to change. Can you tell me where the spacers go? In other words how many spacers go on each side?

TIA
Their should be instruction with the BB explaining which shims to use and where at for different width BB's. What BB are you using?? :thumbsup:
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #9 ·
Yes JWP, the Howitzer BB mounted on the Xeon perfectly. I had to purchase the tool for the Howitzer BB but for $30 it didnt hurt at all :) I use the Rucktion 2.0 cranks.
 
1 - 9 of 9 Posts
Top