[deejaydque]

Hi Fam,
Long time reader but first time poster.

I have a donor wheelset from a 2020 Norco Bigfoot 2 which has a rear QR "Joytech" hub 190x10mm (which i will use as a spare)

2020 Bigfoot 2 | Bike Archives

www.norco.com

I want to use this wheel onto my 2016 Norco Sasquatch 6.1 which currently has a 197x12 QR Thru axle.

2016 Sasquatch 6.1 | Bike Archives

www.norco.com

I have called and inquired with my local bike shops here in Australia but have little knowledge on the fat bike scene - so here i am

Is or are there any rear hub conversion kits available and or compatible that would work with what i am intending to do.

can you shed some light or direct me to links, solutions from previous experiences etc - would be appreciated.

worse case scenario would be a complete rear hub swap but i dont want to spend over $400 for one wheel.

thanks all.
DJ

 

[htrdoug]

Steel Thru-Axle: D202SB-X12: 12mm*197mm

A Steel Thru-Axle and endcap for Novatec D202SB-X12 hubs: 12mm*197mm. Change between 190mm Quick-Release and 197mm Thru-axle with basic tools.

bdopcycling.com

I have not ordered through them but conversion does exist. And every inexpensive fatbike hub I have seems to have the same axle no matter what brand is on the hub shell.
Converted my 2016 Kona Wo Joytech 190 to a 197 with the axle out of a Framed branded hub.

 

[deejaydque]

Steel Thru-Axle: D202SB-X12: 12mm*197mm

A Steel Thru-Axle and endcap for Novatec D202SB-X12 hubs: 12mm*197mm. Change between 190mm Quick-Release and 197mm Thru-axle with basic tools.

bdopcycling.com

I have not ordered through them but conversion does exist. And every inexpensive fatbike hub I have seems to have the same axle no matter what brand is on the hub shell.
Converted my 2016 Kona Wo Joytech 190 to a 197 with the axle out of a Framed branded hub.

PENDING UPDATE

thanks champ,

i have sent them a message and see what they come back with as a solution or conversion kit...

i will update back here once i have an update!