[ghabe]

I need some 145-150mm cranks which are compatible with a BB92 frame... I was going to order the Brood Styx, but they won’t fit according to Spawn. Any other suggestions?

 

[2melow]

Nothing off the shelf, but you can put something together using a Trailcraft 140mm or 152mm cranks (uses an aluminum 24mm spindle)
https://www.trailcraftcycles.com/product/trailcraft-direct-mount-cranks/

and Wheels Mfg BB92 to Shimano standard bsa bb adapter: https://wheelsmfg.com/bottom-bracke...-abec-3-bb-for-24mm-shimano-cranks-black.html

This setup works great with a lot of the chinese carbon BB92 and PF30 bb shell frames out there.

Lots of good stuff listed here.

https://wheelsmfg.com/products/bb-crank-adapters.html

 

[svinyard]

I think Suntour makes some 152mm cranks. Maybe they fit what you have?

 

[ghabe]

Nothing off the shelf, but you can put something together using a Trailcraft 140mm or 152mm cranks (uses an aluminum 24mm spindle)
https://www.trailcraftcycles.com/product/trailcraft-direct-mount-cranks/

and Wheels Mfg BB92 to Shimano standard bsa bb adapter: https://wheelsmfg.com/bottom-bracke...-abec-3-bb-for-24mm-shimano-cranks-black.html

This setup works great with a lot of the chinese carbon BB92 and PF30 bb shell frames out there.

Lots of good stuff listed here.

https://wheelsmfg.com/products/bb-crank-adapters.html

Thanks, I contacted TrailCraft... We'll see what they say!

 

[ghabe]

I think Suntour makes some 152mm cranks. Maybe they fit what you have?

You're right, Suntour has the ZERON 1-X. There's also the SRAM NX available in 155mm.

I've also shortened two cranks in the past. I might consider doing that again, if I can find a proper crank.