[HeezaGeeza]

Hi guys,

Can anyone tell me if I can run a 150mm rear hub with 12mm thru axle on a Mojo (specifically Crank Bros Opium). I've seen a Mojo with Hadley hub and 12mm axle here but don't know about hub width?

Afraid I don't know much about hubs and searches don't seem to answer this question specifically.

 

[ddraewwg]

Not an expert but you can't run a 150 hub nor a 12 mm TA. You can run a 10 mm.

 

[derby]

135mm hub, 10mm dropouts.

Probably not a good idea to drill the dropouts for 12 mm.

Unless something has changed it appears the HD will also be 135mm hub width but will have 12mm dropouts. http://www.ibiscycles.com/mountain/mojohd/

 

[hanssc]

135mm hub, 10mm dropouts.

Probably not a good idea to drill the dropouts for 12 mm.

Unless something has changed it appears the HD will also be 135mm hub width but will have 12mm dropouts. http://www.ibiscycles.com/mountain/mojohd/

Correct!

H

 

[HeezaGeeza]

Correct!

H

Bugger. Pity I just dropped $1100 AUD on new set of CB Opium wheels then. I went Opium for 20mm front axle and colour match red.

Damn my inability to check things properly before buying. Hopefully I can return and go back to find a new set of wheels to pimp my ride.