[trlrdr]

well greased ,low miles any ideas?

 

[Gazzer]

I had the same on my '09.

It's the main DW pivots down at the bb. Turner do a modified assembly ( 2x DW link plates & 2 pivot pins ) built to tighter tolerances than the originals. An e-mail off to Greg at Turner HQ, & new parts were shipped out.

 

[2TurnersNotEnough]

well greased ,low miles any ideas?

On my early '09 Sultan, I disassembled and liberally greased the upper and lower pivots and it still was making noise. I finally narrowed it down to the derailleur hanger, which was fixed by removing the derailleur hanger, and applying grease between the hanger and the frame.

 

[trlrdr]

5 spot creaker

Spoke with Greg @ Turnerbikes and parts are on the way, customer service is top notch.:thumbsup: :thumbsup: (Thanks Greg)

 

[dickie]

Was mech hanger on my 09 DW Flux.

 

[Silentfoe]

Yep, I had the new shafts put in my 09 Sultan and it still creaked. It was the derailleur hanger.