Mountain Bike Reviews Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
180 Posts
Discussion Starter · #1 ·
With any pressure in the SPV air chamber, the fork compresses and rebounds slowly and is quite stiff. Without air in the SPV chamber, the fork becomes responsive. The rebound assembly was recently replaced. Adjustment to the rebound or SPV air chamber size does not alter this behavior. This behavior predates the rebound assembly replacement. Any suggestions as to the cause of this problem?
 

·
Registered
Joined
·
1,740 Posts
Take it back to where it was rebuilt. Something's wrong.
testtech said:
With any pressure in the SPV air chamber, the fork compresses and rebounds slowly and is quite stiff. Without air in the SPV chamber, the fork becomes responsive. The rebound assembly was recently replaced. Adjustment to the rebound or SPV air chamber size does not alter this behavior. This behavior predates the rebound assembly replacement. Any suggestions as to the cause of this problem?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top