Search Results for ‘wheel’

Hi, The Nukeproof Horizon V2 has been compared to DT 1700 on this forum before. However, the latter is considerably more expensive, at least where I live. Horizon V2 and DT-Swiss M1900 both weight just over 2 kg and get good reviews and are similar priced (NP 360 euros including rim inserts...

Is there a significant difference in strength between the Flow MK4 and the EX511?

Hello, I have a build a rear wheel on roval hub (DT swiss 240) with ZTR rapid rim (internal 21mm) for sometime and i ride on Kona hei hei DL trail AL XC and some trails. since internal width is only 21mm and its an old rim i thought on 2 options: 1 Buy a new DT swiss X1900 wheel (internal width...

Hi there! Does anybody knows or have this same issue with the silverstone 29” wheels? (See pictures attached) I recently bought a Spark team issue and found in both wheels the same aprox 3mm hole. Appreciate your comments.

Hi, i just noticed today that when i am using the front brake on my hardtail trek marlin 5 today when i pulled the lever and the wheel just moved to the left when i am looking at the tire, its going left but no fork rub and i think this only happened today, is this a common issue? should i do...

I have a new set of ex1700 29" IS wheels. Overall they are amazing. However the front wheel has a problem. A little ring that holds the hub spacer on does not stay tight in the hub. No matter how many times I push it all the way in flush, every time I take the wheel off it falls off and never...

Well this supply chain issue has put me into a bit of a pickle for prepping my bike for the 2022 season. I have a 2017 Specialized Demo 8. Found out last fall I had a gnarly dent and dip in my rear rim and a pretty much totalled hub. I am in a desperate search for any kind of rear downhill...

I recently bought a marzocchi bomber dj for a dirt jumper. The spacing is 20x110. What kind of hubs/wheels can work with this? Can I run a 15x100 wheel or do I need to get different hub caps? Thanks

Might anyone be able to recommend a rear wheel? One of my [favorite] bikes is a 2020 Salsa vaya. Sort of an odd ball since it takes a 135QR rear and a through axle front due to the updated waxwing carbon fork they added. Love the bike but hate wheel shopping for it. Fortunately I’ve got a nice...

Ok, tried searching and didn't find anything directly related but if there's already a thread please be kind enough to point me in the right direction. I've purchased a set of SRAM Roam 50 wheels secondhand, and two of the spokes need replacing. I have found the OEM replacement in a 3 pack, but...

Sorry if this has been discussed before but I have built a few wheels in the past and my buddy wants me to build his and the hubs where not in the pro builder site. So I measured the hubs the old school method I got 271.6 for the right and 270.7 for the left on the rear wheel . and I got 271 for...

hi, I have a 23mm rim on the front and a 25mm rim on the back. What would be the best combination of tire sizes ? I ride mostly rocky, hard terrain with lots of climbs. Thanks in advance!

I noticed a dent in the sidewall of my rim. There appears to be a slight crack, but it is hard to tell if it is a crack or the paint chipping away in the dented area. This is the first time this has happened to me. I am running tubes so there hasn't been an issue holding air. I went on a 10 mile...

The K-Force Light WideR 25 UD Carbon wheelset has a claimed weight of 1566g in 29er form and sells for $1299. FSA (aka Full Speed Ahead) is moving full steam ahead with two new XC-focused mountain bike wheels, plus something unofficial and wider that Mtbr spied tucked in the back of the display...

DT Swiss now offers wheels with rim widths from 22.5mm-40mm. (click to enlarge) Photo by Michael Riehle/DT Swiss Close to the cosmopolitan town of Nice in the south of France, and next to Grasse (the French perfume capital), is the DT Swiss headquarters for the French and Spanish markets. It's...

Lowdown: Wheelbuilder.com ENVE and Derby Wheels Wheelbuilder.com builds wheels exclusively so they've gotten mighty good at it. They've built wheels for Olympians, Grand Tour riders and teams and the most demanding consumers. Building their reputation on the road market, they've diversified in...

The Roam 60 is SRAM's top tier carbon wheelset. When they debuted in 2013, it was at the cusp of the wider-is-better revolution. Since then, however, wheels and tires have only gotten bigger. The latest from SRAM sports a 30mm wide internal diameter. They've also stepped away from the UST...

A set of carbon wheels such as the Reynolds Dean is arguably the No. 1 upgrade for a fat bike (click to enlarge). Editor's Note: This article is part of the Mtbr Ultimate Guide to winter mountain biking, fat bikes, gear, apparel, lights and trainers. We are taking a deep dive into all manner of...

I found a front wheel at white ranch. please send a description and location.:out:

I have a Gravity Basecamp Mountain Bike and I needed to true the wheels and I made it worse, I think, not knowing what I was doing! Should I loosen all the spokes to where I can start to see the begining of the thread, and just start over by giving each nipple an equal turn till they are tight...