Search Results for ‘forks’

Brand new take off set of Fox Factory 36 Grip 2 forks 29”, 160mm travel, 44 offset. Steer tube factory cut down to 170mm. 1 1/8 - 1 1/2 tapered. 15x110 axle Asking 780$ Local 44136 or PayPal Shipping Thanks

I have biked on trails for the last season probably like 20 or so times with a suntour xce fork. While I have only a crappy mongoose bike to compare it to from 15 years ago I am unsure if changing the fork is worthwhile until it is wrecked or not performing. When do you fine people suggest...

The other day I was looking at a new bike and it seemed like a good bike… seemed very similar to my current bike. Except I noticed it was rocking a dvo onyx d1 sc fork. I don’t know much about dvo. I currently run a 2018 fox 36 preformance fit 4 damper at 170mm of travel. This bike has a dvo...

I've cut a steerer tube with a pipe cutter and had to file off the end of the steerer in order to round it off so that I can get the stem over it for reassembling. Should I be concerned about the filings which appear to have gotten themselves all over the stanchions and seals. I've wiped and...

Hello, I bought the Fox 36 170mm forks but need to convert them to 130mm to work with my frame. What would you do, go ahead and convert or buy 120 or 130mm replacement forks and resell the unused Fox 36 forks? My options: Pike Ultimate 130mm 27.5" 46mm offset RockShox Pike Ultimate Charger...

Hi there, I bought the 27.5" Fox 36 Performance Elite 170mm 44mm offset Grip2 forks for NZD$1217 36 Float Performance Elite Boost Fork My frame is the Stanton Sherpa Gen 3 steel hardtail with a recommended fork travel of a maximum 130mm. I bought the Fox 36 forks thinking I could simply...

I thought I would share my experience of trying to upgrade the fork on my sons 24 inch mountain bike (on a tight budget). Something I thought would be straight forward but wasn’t. In my case I started with a second-hand Trek Roscoe 24 which I picked up for $300 AUD (Australian Dollars). The...

Hey all, I have an annoying noise in my Suntour Durolux36 RC-PCS 160mm forks. It doesn't seem to effect performance but damn it gets annoying on the trail. What I'm wondering is if its normal for these resin spacers to be able to move around like this? I don't know if when after adding air to...

Hi All Hoping for some advise from community once again ... please see below images Problem 1 - Right hand forks are my old forks and the left ones are my new ones ... but I can't seem to get them to fit I have put the bearing in my hand over the new one but I feel as if I'm missing something...

Hi All ? I have recently purchased a Kona Fire Mountain 2021 , I am happy with the bike but the forks are very stiff , I feel even over the local trails I'm holding a jackhammer and the forks absorb very little shock ?, I am looking to upgrade rather quickly but unsure what to upgrade to or...

Hi, Firstly Ii know not but am trying, 2ndly I'm needing to get the boy some new (or used) forks for his 26" hardtail. He does big jumps but also wants to improve his technical downhill. I was looking at manitou circus; but then thought he has his jump bike for that stuff; with old Marzocchi...

Looking for some advice on upgrades on the roscoe 8. Made the mistake of riding a friends new intense primer mtb around the parking lot after we just got off the trails. The entire feel was different. He's much more into hard downhill stuff so I don't need that type of geometry, but the brakes...

Hi everyone I've recently purchased mtb carrera vengeance and would like to replace the current Suntour XCM, 100mm forks as they don't seem to be the greatest what's would be the ideal 100mm fork Rockshox or Fox ? Also could I fit a 120mm on a 27.5" wheel and is it worth it? Is it gonna make any...

Hi everyone I've recently purchased mtb carrera vengeance and would like to replace the current Suntour XCM, 100mm forks as they don't seem to be the greatest what's would be the ideal 100mm fork Rockshox or Fox ? Also could I fit a 120mm on a 27.5" wheel and is it worth it? Is it gonna make any...

Manitou is another division of the Hayes Bicycle Group that is fully supporting the 27.5 movement. Highlighted here are the Manitou Marvel, Minute and Dorado mountain bike forks. The Marvel is XC oriented and comes in 80, 100 or 120mm of travel. The Minute is trail oriented and comes in 120...

One of the main things I wanted to see at the Sea Otter Classic this year was DVO Suspension's new Emerald Inverted downhill fork. I've been seeing photos of it on Facebook for a while but Sea Otter was my first chance to see it in person. I can now report that the DVO Emerald is just as sexy in...

Highlighted here is the Suntour Axon Werx Carbon fork that was used by Julie Bresset to win an Olympic Gold Medal for XC and Julie also won Gold at the World Championships. The same model of fork produced another Gold medal at the World Championships for Roger Rinderknecht in the 4x discipline...

Hi guys, I was in my local bike shop today and was offered a brand new pair of Pace Fighter forks from 2009. I think they have 150mm of travel, look great and are very light. Now they have been hanging around in the shop since 2009 and the price they offered me was £275. I currently run...

Hi All! I just picked up a 2008 trance 2 (all stock except for the grips) and I am thinking of doing some upgrades. I've sort of fallen into the category of "just switched from a HT to a DS XC bike but now that I am getting the feel for the DS I just want to do more nuts all-mountain riding."...