Search Results for ‘damper’

I'm looking for some more insight into how spring/damper forces interact (not practical advice regarding my bike). I'm riding a Sentinel V2 for which cascade components have developed a link. The stock link creates a ramp-up of roughly 25% and the cascade link turns that into 29% at my desired...

So, being off the bike due to injury, I've been playing a bit in the workshop instead. Next project is to revalve my front fork... currently a bit too much platform and a little too much brake dive. Its a Manitou M30 with the ABS+ damper from an R7, and Manitou helpfully provide all the dyno...

Hi all, I'm looking to convert my X fusion vengeance RC coil to an air spring, and also upgrade to the HLR damper, but i cant find a 36mm version of this damper, or an air spring to change this fork either. If anyone could help me find this it would b much appreciated. :)

I have a 2010 Totem that I am servicing, more specifically the damper I filled up the damper with the recommended oil volume from Rockshox and its overflowing and up to the threads. I'm not sure what to do as I don't want to damage my fork.

Hello everyone, I have a 2013 fox float 32 and I would like to upgrade it since I've heard the stock damper is awful and the air spring is also a bit problematic. I have access to NOS parts via Suspension Werx in Vancouver BC but they are pricey and they are insisting I send the whole fork in...

Hey guys, I've got some 2008 rockshox totem IS forks (the coil ones with the single low speed compression knob) and might have a problem. I'm getting a clunk when I compress the fork, and then let it back up again (like when you go to start a manual), but its not a topout clunk, cause the...