|
Avid
Speed Dial Ultimate 01
|
|
|
|
|
|
|
Buy and Sell the Speed Dial Ultimate 01 from our Classifieds.
|
Shop for Similar Products
|
|
|
|
|
|
| |
Submitted by
Eryk
a Weekend Warrior
from NJ
Date Reviewed: October 12, 2005 | | Duration Product Used: | 3 months | | Price Paid: |
$150.00 | | Purchased At: | Price Point | | Strengths: | Weight, looks, rebuildability, adjustability, open clamp design | | Weaknesses: | Slop - at $150 or $200 there should be none especially with the bearings - and yet the lever has more slop than the '96 Avid Ultimates | | Similar Products Used: | Avid SD 2.0, Avid SD 2.0l, Avid SD 7, '96 Avid Ultimate | | Bike Setup: | Titus Loco Moto, Raceface turbines, Manitou Black Super Air, Hayes/DT Hugi/Velocity Wheelset, Avid mech Disc Brakes, XTR/SRAM X.O Drivetrain... | | Bottom Line: | The levers look awesome, the adjustability is great, but no greater than the Avid SD 7, the slop at the lever is close to Avid SD 7, and much worse than some low end Shimano levers. This is a replacement pair which was supposed to have less slop than the original pair - well the difference is too small to call it an improvement. I'm not sure if I'm the only one who feels that these have too much slop for the price - everyone else seems to be satisfied. I compare these to my old ultimates and the difference is huge - no slop vs a lot of it!! Since SRAM took over the quality must have deteriorated, and the customer service is horrible - all of a sudden you have to go through a dealer to get anywhere! SRAM obviously doesn't care about customer feedback - kind of sad... In any case if you want levers with a lot of adjustability - get SD 7 you won't be dissapointed. The Ultimates (in my case at least) have been a dissapointment - I was expecting perfection and did not get it - at $150 per pair I think its a reasonable expectation... | Value Rating: Overall Rating: |
Submitted by
Chris
a Cross Country Rider
from San Antonio, Tx
Date Reviewed: July 11, 2005 | | Duration Product Used: | More than 3 years | | Price Paid: |
$90.00 | | Purchased At: | forgot | | Strengths: | Well machined, looks and feels sexy, works REALLY well, great modulation. | | Weaknesses: | a bit pricey..(but thats cool for the bling-factor ;)+ the work damn well | | Similar Products Used: | Shimano XT. | | Bike Setup: | XC Hardtail | | Bottom Line: | Yes the are expensive. But they work exceptionally well. If levers appear sluggish on the pullback:
- try rerouting your break cable housings as to provide the least amount of friction for the brake cables.
- Maybe consider buying high quality break cable housings and cables (Jagwires for example).
- Adjust your break tensoners correctly.
Believe me...you will see they work like butter. They inspire confidence and you'll ride harder. | Value Rating: Overall Rating: |
Submitted by
SRR
a Cross Country Rider
from Tacoma, WA
Date Reviewed: April 21, 2004 | | Favorite Trail: | Little Bald Mountain | | Duration Product Used: | 3 months | | Price Paid: |
$115.00 | | Purchased At: | CBO (Cambria) | | Strengths: | Sealed bearing (but not such a big deal). | | Weaknesses: | Cable adjusters, bar clamps. | | Similar Products Used: | XT (many varieties), Avid SD-7's, Precision Billets Pro Shifts. | | Bike Setup: | Hammerhead 100X | | Bottom Line: | I don't see what all the rave is about; these levers work no better than the much cheaper SD-7's. And if lever-slop ever became a real 'issue' with those, I could have two spare sets on my shelf for the same money. I don't like the sharper contour of the Ultimate lever itself; it's less comfortable. And the cable adjusters are, well, really Micky Mouse, in my opinion. Or is it Robo Cop? because the styling is not clean or smooth like the 7's or the XT/XTR's. Plus the removable clamps are kind of pointless, since there aren't any shifters out there that may be removed the same way.
I was building a new bike and simply fell to the illusion that suggests price equals performance (ignoring my own experience). Now I'm embarrassed to have paid so much for these. Although the sealed bearings are a nice touch, they're overkill.
Note: I have pretty much the same comments for the matching V-brakes. Not enough return for the money. | Value Rating:Overall Rating: |
Submitted by
beeristasty
a Cross Country Rider
from Columbia, SC
Date Reviewed: October 19, 2003 | | Favorite Trail: | Lynch's(Lynches?) Woods | | Duration Product Used: | Less than 1 month | | Price Paid: |
$115.00 | | Purchased At: | Jenson | | Strengths: | Lightweight, buttery smooth lever action, good design of the lever blade, cartridge bearings | | Weaknesses: | It will put a hole in your wallet, a very, very big hole. | | Similar Products Used: | Avid SD 1.9 and Avid SpeedDisc(the closest comparison would probably be SD 7's) | | Bike Setup: | Avid mechanical discs with WTB LaserDisc Lite hubs/Mavic 317's | | Bottom Line: | How well your brakes work and feel are about 85-90% cable routing and housing length, so I meticulously set up my cables for the least possible amount of friction possible. With the SpeedDisc levers, the action was smooth and the feel was good, there was just some annoying lever slop. This could have probably been fixed by adding a washer in there somewhere, but I wasn't in the modification mood. So I decided to lay down the cash and get The Ultimates. I could feel the difference, however slight, and there was a lot less slop. Don't get me wrong, they are excellent levers, but if you want better performance out of your brakes and can't afford to spend $115+ for the Ultimates, then set up your housing to where friction is reduced to an absolute minimum, you will feel the difference more so than by buying swanky brake levers. | Value Rating: Overall Rating: |
Submitted by
Bish
a Weekend Warrior
from San Jose, CA, USA
Date Reviewed: May 4, 2003 | | Favorite Trail: | Singletrack | | Duration Product Used: | 6 months | | Strengths: | Lightweight, good looks, awesome functionality, speed dial, machined aluminum, excellent modulation. | | Weaknesses: | They don't come in as many colors as the older SD's did. | | Similar Products Used: | Previous version of the SD Ultimates, Shimano | | Bike Setup: | Santa Cruz Superlight, Marzocchi X-fly, custom built, no Shimano on the bike. | | Bottom Line: | The are, in my opinion, the best mechanical brake levers on the market. The machining is excellent. The light weight is awesome. These levers are smooth and have no slop. Installation is a breeze, thanks to the removable clamp. And the speed dial is the icing on the cake. I love being able to change the entire brake feel to fit me on the fly. They cost more than other levers, but I figure you get what you pay for in this case. The only downside is that they don't come in as many colors as the previous SD's did. Had to settle for black on silver. | | Value Rating:Overall Rating: |
Submitted by
Jon
a Cross Country Rider
from Calgary
Date Reviewed: March 12, 2003 | | Duration Product Used: | 3 months | | Price Paid: |
$90.00 | | Strengths: | Well where do I start? Smooth, Light, Durable, Eye Candy, Functional. Makes your cable discs feel like hydrolics. No kidding. | | Weaknesses: | Price - However I believe in this case you get for what you pay for. In my mind the price is justifiable. | | Similar Products Used: | XT, XTR, Avid SD Mag and Avid SD 7. All good but not in the same league as the Ultimates. | | Bike Setup: | Tracer with all the high end goodies, Chris King, Easton, XTR, Selle Italia, Race Face, Avid etc. | | Bottom Line: | These levers have a lofty name to live up to and they do. They are rock solid with absolutely no play in the levers and hydrolic smooth feel to them. I would recommed these to all cable disc users. | | Value Rating:Overall Rating: |
Submitted by
Ben
a Cross Country Rider
from St Paul,MN
Date Reviewed: March 6, 2003 | | Favorite Trail: | The Farm | | Duration Product Used: | 6 months | | Price Paid: |
$60.00 | | Purchased At: | Prodeal from Avid | | Strengths: | Super light
Wicked, Black Ops CNC look
Silky smooth
Many and easy adjustments (one-handed barrel adjusters rule) | | Weaknesses: | Friggin expensive!!! These suckers were expensive on prodeal for crying out loud! | | Similar Products Used: | SD5, SD7, XTR | | Bike Setup: | '01 Schwinn Homegrown Comp; XT/XTR, King classic/x517 wheels, '03 Skareb Super, Avid Black Ops levers/brakes | | Bottom Line: | CNC components are way cool, even if they do cost a mint. These levers definitely have that stealthy, black ops machined look. These are the trickest levers out there. They have it all... stainless hardware; sealed, easy to replace bearings; comfortable feel; "bend-zone" lever arms to prevent crash damage to the main mechanism; extra-wide range speed-dial leverage adjustment; adjustable reach; one-handed barrel adjusters (which are super cool); they even have a two-piece clamp so they clamp onto the bar without having to slide them over the ends, making them great for carbon bars or bikes with bar ends. All that, and they're still some of the lightest levers around.
So, if you've got the cash, you too can have the trickest, stealthiest, smoothest levers money can buy. Hey, you can probably drop some weight off your bike while you're at it, too. | | Value Rating:Overall Rating: |
Submitted by
Ride Biker
a Cross Country Rider
from Santa Cruz, CA
Date Reviewed: August 30, 2002 | | Duration Product Used: | Less than 1 month | | Price Paid: |
$110.00 | | Purchased At: | LBS | | Strengths: | solid, sealed, stiff, powerful, easy to adjust, no grip removal installation, plenty of speed dial adjustment, plenty of barrel adjustment, no lever slop, reach adjustment, bend zone, sexy | | Weaknesses: | $$$ | | Similar Products Used: | Shimano levers, Avid 2.0 levers | | Bike Setup: | '02 Superlight, Avid Ultimate V's | | Bottom Line: | The best levers I have used anywhere. They are a no compromise piece of kit. If you have the money and are doubting this purchase, don't. These seem like they are going to be lifetime levers. With the Ultimate V's, I am in stopping heaven ! 5 chiles all around, they are worth the $$$. | | Value Rating:Overall Rating: |
Submitted by
Rod Harper
a Cross Country Rider
from Monroe
Date Reviewed: August 22, 2002 | | Favorite Trail: | Potawatomi Trail (Pinckney State Recreation Area) | | Duration Product Used: | 6 months | | Price Paid: |
$120.00 | | Purchased At: | Jack's Bicycle & Fitness | | Strengths: | Super Cool Look. The lever has a great feeling on the fingers. Very lightweight! | | Weaknesses: | Difficult to replace levers when I bent them in a crash. The spring didn't want to stay in place when I pushed the two halves back together. Finally found trick to make it work. | | Similar Products Used: | Shimano XTR, Shimano XT, CODA | | Bike Setup: | Giant NRS, Duke SL, Thomson stem/seatpost, Easton riser bar, XTR drivetrain, Hugi 240/mavic disc wheelset | | Bottom Line: | These levers are GREAT! I crashed at my favorite trail and the levers swung around and scratched over my top tube. But they do what they said they would and the lever just bent up, the body of the brake lever was just fine. 35 dollars for replacement levers. Excellent modulation adjustment. I use these levers in conjunction with Avid 185mm disc brakes. | | Value Rating:Overall Rating: |
Submitted by
Martin
a Weekend Warrior
from San Diego, CA, USA
Date Reviewed: July 20, 2002 | | Duration Product Used: | Less than 1 month | | Price Paid: |
$120.00 | | Purchased At: | Jenson | | Strengths: | Light, stiff, machined from solid, far stronger than cast brakes. Excellent quality. | | Weaknesses: | Expensive, but you get what you pay for. | | Similar Products Used: | XT, Avid Mag Levers | | Bike Setup: | Superlight with Avid mechanical discs. | | Bottom Line: | In combination with Avids mechanical discs they are amazing, solid, no slop and excellent adjustable modulation. Far better feel and power than the XT levers they replaced (that went on the wifes bike). With other levers you can feel the slop and bend, these are rock solid. Tried some lower level Avids but the sloppy bushings put me off. Shimano levers only have 'servo wave' which didn't work well the mech discs. If you'r starting from scratch the cost of mechanical discs + the Avid Ultimates is not far off Hope Mini's so the value for money isn't that good. If however you already have mechanical discs they are thoroughly recommended. | | Value Rating:Overall Rating: |
Submitted by
Barry
a Cross Country Rider
from North Vancouver
Date Reviewed: December 26, 2001 | | Duration Product Used: | 3 months | | Price Paid: |
$110.00 | | Purchased At: | Jenson USA | | Strengths: | Works of CNC art, lightweight, incredibly smooth bearings, nifty bar clamp, very teeny laser writing in case you ever find a mechanic with terrific eyesight and no idea how tight things should be. | | Weaknesses: | The cam profile style cable adjusters which can be like adjusting the right temp on a shower knob (too hot too cold too hot too cold too hot too cold) | | Similar Products Used: | Diacompe, AVID SD 1 and SD 2, Shimano LX | | Bike Setup: | 2000 RM Vertex with mucho Race Face stuff and 7 speed thumbshifters with XTR cogset and derailleur | | Bottom Line: | I was developing pivot slop in one of the pair of SD2's and there seemed to be no way to get rid of it so I thought I'd see if really tweaky expensive levers might be worth the $. Jenson had them on sale so I tried em. At the same time I found a great deal on the Ultimate VBrakes at beyondbikes.com so I ordered a set of them as well. Wow, I wouldn't have thought real bearings would have made that much difference but it was like adding fresh teflon coated cables, there's a fraction of the friction in the lever and brake pivots and you can back the tension way off on the vbrakes so that the lever pull is really light and responsive. They are feathery light too. If money isn't the issue but build quality and performance is, then they just might be the ultimate levers. They are pricey but you actually get value for the money, not glitz or endorsement budgets. | | Value Rating:Overall Rating: |
Submitted by
Steve
a Weekend Warrior
from Brighton
Date Reviewed: December 19, 2001 | | Favorite Trail: | White Ranch | | Duration Product Used: | 3 months | | Purchased At: | www.jensonusa.com | | Strengths: | The smoothest, most adjustable lever available.
Very light, excellent craftsmanship. Sealed cartridge bearings and stainless steel hardware cannot be beat. | | Weaknesses: | None. | | Similar Products Used: | Shimano LX, XT | | Bike Setup: | Airborne LS, RaceFace, Chris King, Mavic, Sram | | Bottom Line: | I purchased these levers after having purchased the Ultimate Brakes to replace Shimano XT's that I was unable to stop from squealing. This is as the name implies, the Ultimate in V-brake technology. There is nothing else to say. They are worth the extra money,(and time I had to wait to get them as the were out of stock when I ordered them.)If you want the best, look no further. This is it. Call Lee Baldwin @ Jenson. He'll set you right up. | | Value Rating:Overall Rating: |
Submitted by
Chris
a Racer
from San Antonio,Texas
Date Reviewed: September 6, 2001 | | Favorite Trail: | Flat Rock Ranch | | Duration Product Used: | 3 months | | Price Paid: |
$109.00 | | Purchased At: | JensonUSA | | Strengths: | Looks killer, feels perfect in fingers, lightweight,
outperforms everthing else in its category | | Weaknesses: | Price | | Similar Products Used: | Shimano XT, XTR brake levers | | Bottom Line: | If you want to really increase your brake performance, get these levers. You may pay a premium, but I think exclusivity and performance have a price. These made my bike brake much better. | | Value Rating:Overall Rating: |
Submitted by
Spectre
a Cross Country Rider
from Mountain View, CA
Date Reviewed: June 14, 2001 | | Favorite Trail: | Soquel Demo Forest | | Duration Product Used: | 3 months | | Strengths: | Split clamp allows easy mounting without having to remove handlebar
Smooth feel
Power/Modulation is adjustable | | Weaknesses: | Expensive
Cable adjusters are not attached to lever body | | Bottom Line: | The Ultimate levers feel great. Adjustable power/modulation with the Speed Dial feature is nice as well. The lever is mounted on bearings and has no slop. Only downsides are that the cable adjusters are not attached to the levers and can fall out before cables are installed & the lever is fairly expensive. Highly recommended! | | Value Rating:Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
$
