|
Ritchey
Forcelite Ahead Stem
|
|
|
|
|
|
|
|
|
| |
Submitted by
Calvin Hobbs
a Weekend Warrior
from Richmond, VA USA
Date Reviewed: May 13, 2001 | | Duration Product Used: | 1 Year | | Price Paid: |
$50.00 | | Purchased At: | LBS | | Strengths: | Light
Nice Powdercoated finish
Simple
Nifty little plastic Ritchey emblem on faceplate of stem | | Weaknesses: | Narrow shaft that allows for some flex | | Similar Products Used: | Azonic ORC | | Bike Setup: | GT Avalanche | | Bottom Line: | The bottom line is that this is a great stem for the money. I paid 50 bones for it. It's light, it's neat, it's simple, it's non-flashy, and it looks quite nice. It's cold-forged, with no welds of any kind. Believe it or not, that gives me some confidence in the integrity of any product. Welds can fail easily.
It does flex though, because of it's narrow shaft. My Azonic ORC was on an order of magnitude stiffer than this Ritchey stem (forget about the fact that the Azonic is ugly as hell). Because of the flexiness of this Ritchey stem, I wouldn't recommend it for freeriding or for use with riser bars because they are longer and would allow you to put more torque on the shaft of this stem.
As an XC stem to be used with normal length flat bars, I would highly recommend the Ritchey. And for $50, you'll get that rare feeling of actually getting more than what you paid for. 5 chilis for value. 4 overall (because the stem is not well suited to more kinds of riding. | Value Rating: Overall Rating: |
Submitted by
James
a Racer
from Austin TX
Date Reviewed: October 30, 1999 | | Favoriate Trail: |
Flat creek | | Duration Product Used: |
1 Year | | Strengths: |
Had it for 14 months,5 races never had to mess with it period.
Ritchey product. | | Similar Products Used: |
KORE, Control tech | | Bike Setup: |
98S-Works M2 | | Bottom Line: | See strengths.
Ritchey rocks, the only product I've used of his that sucked was the tubes. 225# racer. Frame, Rims, H-bars,stem,spokes, pedals,tires,seatpost,headset | | Overall Rating: |
Submitted by
Katrina Miller
a Racer
from Sydney, NSW
Date Reviewed: October 23, 1999 | | Duration Product Used: |
2 Years | | Strengths: |
Good, non-flex, light stem. | | Weaknesses: |
None. | | Similar Products Used: |
Kore lite | | Bike Setup: |
Wheeler 5000zx, lx groupset and Zokes Pro forks. | | Bottom Line: | Good fork, nice with riser bars. Light but still strong. | | Overall Rating: |
Submitted by
Steve
a Cross-Country Rider
from Minneapolis, MN
Date Reviewed: September 25, 1999 | | Duration Product Used: |
6 months | | Strengths: |
Light, stiff, inexpensive, satin finish looks great all the time | | Weaknesses: |
Bolts got rusty after one wet ride. | | Similar Products Used: |
Kalloy, Ritchey quill | | Bike Setup: |
Fuji Pro frame
mixed components
Judy SL fork | | Bottom Line: | It's light, it's inexpensive, it does everything a stem should, including keeping quiet. A quick shot of Boeshield stopped the rust on the bolts, but for $20 I'm more than willing to live with it. | | Overall Rating: |
Submitted by
Jay Norejko
a Cross-Country Rider
from Bethlehem Pennsylvania
Date Reviewed: June 8, 1999 | | Favoriate Trail: |
MountainGoat (WinterPark, Co.) | | Duration Product Used: |
3 months | | Strengths: |
Inexpensive, light, does the job | | Weaknesses: |
None | | Similar Products Used: |
Icon | | Bike Setup: |
1998 Klein Mantra Comp (large frame) | | Bottom Line: | I needed a shorter stem (105mm) for my Klein and the Ritchey stem was a lot cheaper than the other stems I was looking at. It may not have the welds of a Kore stem but who needs them anyway. By the way I've noticed no flex in the stem and I've done some pretty aggressive riding with it. | | Overall Rating: |
Submitted by
Mike
a Cross-Country Rider
from Rochester, NY
Date Reviewed: April 21, 1999 | | Duration Product Used: |
6 months | | Strengths: |
Light, inexpensive ($20 mailorder) and it works. | | Weaknesses: |
none | | Similar Products Used: |
Kore, Specialized | | Bike Setup: |
Specialized Stumpjumper M2 w/ RS Judy fork. Shimano LX/XT. Hyperlite EA70 bar. | | Bottom Line: | This review is for the Ritchey Comp Lite aheadstem. Mine is a 1, 120mm with 6 deg of rise. This stem is light and strong. The manufacturing process used (cold forged, not welded) results in a low cost, strong, dimensionally accurate stem. This is a great product. My stem is secure, no creaks whatsoever; bar is tight, steerer is tight. What more could you want for $20. Goodbye Kore, you are expensive, heavy and I don't like your welds (but you are still cool). To the guy who stripped his bolt. First start with clean parts. Then, if you haven't learned to tighten steel bolts into alloy threads yet, get a torque wrench to learn the feel. Otherwise leave it to your trusty LBS. | | Overall Rating: |
Submitted by
Helix
a racer
from The Netherlands
Date Reviewed: May 18, 1998 | | Bottom Line: |
Agree, not that crappy at all. Light, didn't break yet, does everything a stem should do. Nothing more. Doesn't have the coolness of a syncros stem or something. Loses an extra chili because the stem/bar angle is not perfectly 90 deg. Difference is a little too much.
Have fun riding. Spend your money on a nice holiday instead of nothing adding expensive parts (like I do. stupid...)! | Overall Rating: |
Submitted by
Alex Sinanan
a
from Victoria, BC
Date Reviewed: January 16, 1998 | | Bottom Line: |
I was completely disappointed with this stem. I always thought that a stem was a stem. how wrong i was.
First, the stem would not bind properly to my steerer, then i couldn't get it to clamp my bar properly. My
steerer is a standard 1.125 aluminum steerer and my bar is a Critical Racing bulged Al bar. Nothing too
unusual. Upon trying to tighten the bar clamp, the bolt broke and it turns out that it uses a special female end
to anchor to the clamp. To get a replacement i had to contact a Ritchey dealer who special ordered one for
me. Also, this stem flexes like crazy. I know that Ritchey products are often build on the lighter side of safety,
but this was extreme. I ditched it. It was too much hassle to save 35 grams. To add insult to injury I replaced
it with a Taiwanese Kore-Licensed Ringle copy stem with removable faceplate. I did this despite the reader
reviews against Kore stems. This stem worked great. It's competitively light (195 g) and i've had no creaking
and my bar is held tight.
I will never buy a Ritchey product again. | Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
$
