|
|
Average Rating
|
5/5
|
|
# of Reviews
|
6
|
|
MSRP
|
$ 40.00
|
|
Weight
|
|
|
More Products from Bontrager
Submit a Review
|
|
|
Description:Forged from 6061-T6 aluminum and has better fatigue characteristics than any threadless stem we've tested
Steerer tube binder bolts are mounted forward and on the side to avoid contact with your knees
Handlebar clamp is a dual bolt design to make stem changes simple
46mm stack height abd 1 1.8" steerer clamp diameter
|
|
|
|
|
|
|
|
|
| |
Submitted by
Ed Salazar
a Cross Country Rider
from Redwood City, CA
Date Reviewed: October 7, 2002 | | Favorite Trail: | If I tell, the | | Duration Product Used: | More than 3 years | | Strengths: | Tough, Great bolt position, inexpensive, came in 1" to fit my steerer (Keith, why did you stick with the 1" so long? Shocks with 1" steerers are getting tough to find.) | | Weaknesses: | Mine is a pre-Trek stem. I have heard rumors quality has slipped but who can be sure | | Similar Products Used: | Many and various | | Bike Setup: | Santa Cruz built Bonte Race | | Bottom Line: | It fits, it dosen't squeak, in three years of active riding I have done nothing to it but remove the faceplate so I could replace the bars. Install it and forget it, just how components should be. All the other stems I have used have started squeaking or slipping or something after only a few months use, not this one. For the change it has been an oustanding stem. | Value Rating: Overall Rating: |
Submitted by
Steve Eckardt
a Racer
from Huntington, IN USA
Date Reviewed: September 14, 2002 | | Favorite Trail: | Dirt | | Duration Product Used: | More than 3 years | | Price Paid: |
$40.00 | | Purchased At: | Bikeworld.com | | Strengths: | -Very strong/stiff
-Good steerer clamp bolt placement
-Oversized bolts
-Nice finish (silver "satin") | | Weaknesses: | -I have not found any yet | | Similar Products Used: | Kalloy - Giant house brand | | Bike Setup: | Giant alum HT-Manitou fork-SRAM drivetrain-Avid brakes-Sun/Ringle wheels-RaceFace BB & headset-Truvativ cranks | | Bottom Line: | This is easily a $100+ value. The stem has taken 4 years of Sport-level racing/training punishment with absolutely no problems. It is very stiff and does not creak. I like the knee-saving steerer clamp bolt placement, too.
I was seriousely thinking of changing to a different stem, but after considering how well this one has treated me and reading the other reviews, I would be stupid to stop using it. Bontrager has an excellent quality product with this stem. I would recommend it to anyone. | | Value Rating:Overall Rating: |
Submitted by
Charlie
a Cross Country Rider
from Sunnyvale, CA
Date Reviewed: August 30, 2002 | | Favorite Trail: | El Corte de Madera | | Duration Product Used: | 3 months | | Purchased At: | Speedgoat | | Strengths: | I love the way it looks even though looks shouldn't count for much. The silver model is very satiny and goes great with my silver anodized frame. The stem is a little over 200 g (I have a 120 mm)just as Bontrager says it is. It is very reasonably priced. There are no welds to break. Everything is cold forged and then bead blasted. The position of the binder bolts is very nice. Very secure because of the oversized bolts (need a 5mm wrench instead of the usual 4 mm). No creaking. The stem seems to be very stiff, though it's hard to measure. | | Weaknesses: | none | | Similar Products Used: | Salsa, Ritchey | | Bike Setup: | Santa Cruz Superlight with Bontrager Race Lite straight bars; Marzocchi MXR forks, SRAM Shorty 9 shifters, Avid SD5 levers, Titec bar ends. | | Bottom Line: | Excellent value and no problems at all. They seem very solid and therefore confidence-inspiring to me. Buy them. | | Value Rating:Overall Rating: |
Submitted by
keefe ward
a Cross Country Rider
from dover, nj
Date Reviewed: May 26, 2002 | | Duration Product Used: | 1 Year | | Price Paid: |
$35.00 | | Purchased At: | speedgoat | | Strengths: | Price,strength,choices | | Weaknesses: | none at this price | | Similar Products Used: | salsa,trek OEM | | Bike Setup: | Santa Cruz Bullit DH
Titus Switch Blade Trail | | Bottom Line: | Can't go wrong for the price. Weight isn't bad either. Takes an extra minute to setup because knee saver bolts are on the side and pull the stem to the right when you tighten them. I have 2 of them one 90mm and one 120mm. No problems ever. | | Value Rating:Overall Rating: |
Submitted by
Ethan
a
from Raleigh, NC
Date Reviewed: March 19, 2002 | | Duration Product Used: | 1 Year | | Strengths: | Binder bolts. Looks. No problems yet. | | Similar Products Used: | Some Specialized stem. | | Bike Setup: | Giant XTC. XT/LX components. Rhyno Lites. | | Bottom Line: | Great stem. My knees love the out-of-the-way binder bolts (not that it doesn't still hurt to smack the stem on eject). The bolts are also a bit bigger (6mm?) than other stems, so you can crank down a little harder on them.
I'm pretty rough on my bike and no squeaks or creaks yet. The bars haven't slipped once. Fairly light. Good looking. Can be found cheap.
A good deal overall. | | Value Rating:Overall Rating: |
Submitted by
CHUCK COOK
a Racer
from NASHVILLE,TN.U.S.A.
Date Reviewed: January 24, 2002 | | Favorite Trail: | HAMILTON CREEK&LOCK-4 | | Duration Product Used: | 6 months | | Price Paid: |
$20.00 | | Purchased At: | E-BAY | | Strengths: | VERY LIGHT-STRONG AND STIFF.LOOK'S GREAT | | Weaknesses: | NONE,THAT I FOUND. | | Similar Products Used: | RACE FACE-CONTROL TECH | | Bike Setup: | MARIN,PINE-MT.XT ALL THE WAY.ROCK SHOX SID SL,SELLA FLITE GEL SEAT,THOMSON SEAT POST,BONTRAGER RACE STEM,PROFILE CARBON FLAT BARS,SHIMANO 858 PEDALS,MAVIC 517 RIMS,HUTCHINSON GOLD TIRES. | | Bottom Line: | THIS STEM CAN'T BE THAT BAD,IF ROLAND GREEN THE #1 PLATE HOLDER IN THE U.S.A.RUN'S THIS STEM ON HIS TREK.IT HAS HELD UP GREAT VERY STRONG,VERY LIGHT,LOOK'S AWESOME.I GAVE UP MY 120MM FOR A 90MM AND IT IS A LOT BETTER ON MY BACK NOW.GO OUT AND GET THIS STEM.YOU WON'T BE SORRY..... | | Value Rating:Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
