|
Manitou
MRD Anti-Bob Compression Lever
|
|
|
Average Rating
|
4.33/5
|
|
# of Reviews
|
3
|
|
MSRP
|
$
|
|
Weight
|
|
|
More Products from Manitou
Submit a Review
|
|
|
Description:MRD's Anti-Bob compression lever provides a rigid fork for climbing efficiency, but a plush ride for descending once the Anti-Bob compression lever has been flipped open.
|
|
|
|
|
|
|
|
|
| |
Submitted by
Alan
a
from Chicago
Date Reviewed: April 1, 2003 | | Duration Product Used: | 2 Years | | Purchased At: | 40 | | Strengths: | It works. | | Weaknesses: | Adjusting compression damping is harder but not a big deal. | | Bottom Line: | I have 3 of these on Manitou Mars Super and SX-R's. They are simple to install and maintain as long as you do it properly. The person below either did not have his oil level set properly or he damaged the seals causing leakage. It's a simple and easy to use lockout that works. | Value Rating: Overall Rating: |
Submitted by
SGT. ROCK
a Racer
from Edmonton, AB
Date Reviewed: August 8, 2002 | | Duration Product Used: | 2 Years | | Purchased At: | Aardvark Cycles | | Strengths: | Works | | Weaknesses: | Adds weight
Complicates compression damping adjustment | | Bike Setup: | Hardtail | | Bottom Line: | Bought a 2000 SX-R equipped with MRD anti-bob. After three seasons, both the fork and the lockout still work great. In the lockout position, travel is limited to about 1/2 inch. Invaluable for riding on the road, or up smooth climbs - you don't realize how much energy a suspension fork absorbs until you have a lockout.
I just bought a new frame, but the headtube is too tall for my SX-R. Confirmed with Manitou that my '00 vintage MRD anti-bob will fit in the 2002 Six Deluxe fork, so I bought one. The Six Deluxe is basically a re-badged 2001 SX-R. Hope it performs and lasts like the old fork. | | Value Rating:Overall Rating: |
Submitted by
Bo Rotboel
a Cross Country Rider
from Denmark
Date Reviewed: March 6, 2002 | | Duration Product Used: | 1 Year | | Strengths: | I typically ride between 20 and 30 kilometers of fairly flat asphalt/fireroads to reach my favourite bike-trials. And for this part its really nice to have a locked frontsuspension. Furthermore this function really makes it easier to climb long steep ascends. | | Weaknesses: | It won't lock properly. I know this model isn't supposed to make the fork completely locked, but in my case my fork still moves about 3 inches ...bad!!! Furthermore is it quite difficult to set the lock while riding, because it is placed on the fork and doesn't quite bite. | | Similar Products Used: | Pace's lock-out system mounted on the handlebar. Works perfect and locks the fork totally in a splitsecond. Very nice. | | Bike Setup: | '99 Klein Attitude Race - Manitou SX-R with antibob lock-out system. | | Bottom Line: | The idea is great (goes without saying), but in my case it doesn't work properly. Too difficult to adjust. | Value Rating: Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
