|
CODA
Expert Mountain Handlebar
|
|
|
Average Rating
|
4/5
|
|
# of Reviews
|
6
|
|
MSRP
|
$
|
|
Weight
|
|
|
More Products from CODA
Submit a Review
|
|
|
Description:580 mm in width, 6-degree bend
Q-Lab endurance-tested for long-term ride confidence
Laser-etched logo
|
|
|
|
|
|
|
|
|
| |
Submitted by
Jeff
a
from Sydney, AU
Date Reviewed: September 8, 2004 | | Duration Product Used: | More than 3 years | | Purchased At: | London, UK | | Strengths: | Seem fairly strong- there really isn't that much engineering required for a metal bar... | | Weaknesses: | Typically shoddy CODA workmanship. | | Bike Setup: | XT level Cannondale with all CODA parts removed. | | Bottom Line: | Bars work fine, but like most CODA components there is _something_ wrong with them. In this case it's substandard paint. My black bars faded to bronze within 2 years, and stupidly enough I replaced them with another set of CODA Expert bars after being reassured by a salesguy that Cannonondale fixed the problem. Lo and behold, the second pair faded within a couple of years.
No big problem, it's just irritating to have something so obviously substandard on my bike. I'm going to replace them with Easton bars. | Value Rating: Overall Rating: |
Submitted by
JR
a Cross Country Rider
from mission viejo CA
Date Reviewed: June 18, 2002 | | Favoriate Trail: | whiting to truck trail | | Duration Product Used: | 2 Years | | Purchased At: | rei fountain valley | | Strengths: | This bar is relatively light, it says 220 grams on the next to the cannondale lazer etched logo. That other dude that said it was lighter than the CT2 carbon by Easton is mistaken, unless he is speaking of a different bar. The CT2 actually weighs 125 (127 according to my shop). that 95 grams seems to not make a huge difference, but maybe I will have an easier time wheelie-ing with the fractionally lighter front end. This bar is weighs a little less on my mind however, in that it is made of good old butted 6061 T6 and not that finicky carbon shnack. I was so taken with the looks of a CT2/EC70/EC90 on a friend of mine's bike that I opted to replace this handlebar, and that is pretty much the only reason. Weight savings are minimal in my opinion. | | Weaknesses: | Few. Markedly heavier, though not by much. Keep the bar lubed beneath the stem clamp to keep it from clicking (a common problem when the installer doesn't know what they are doing and leaves the grease off). The tapered ends on my bar always sheared straight through my end caps, but oh well, they're stupid little end caps. | | Similar Products Used: | CT2 | | Bike Setup: | F600 with XT upgrades and yat | | Bottom Line: | works fine, can't get one unless it is spec'd on your c'dale. If you are looking to save weight, look elsewhere. Perhaps the suckey rims that come stock on many c'dales or that heavy fatty fork. | Value Rating: Overall Rating: |
Submitted by
Tommy
a Weekend Warrior
from Fairfield, NJ, USA
Date Reviewed: June 30, 2001 | | Duration Product Used: | 6 months | | Strengths: | price | | Weaknesses: | weight, flex | | Bottom Line: | ok, not for a top of the line jekyll | Value Rating: Overall Rating: |
Submitted by
Scott Kera
a Racer
from Hastings, New York
Date Reviewed: March 13, 2000 | | Favoriate Trail: | Hillside Woods | | Duration Product Used: | Less than 1 month | | Strengths: | The is extremely light. It came with my Jekyll 600SL, 2000. It is tough and hard to scratch. Tried putting in a Yeti riser, but this is lighter. I would buy it even if it didn't come with my bike. Even lighter than the Easton EA70 and Easton CT2 (carbon). | | Weaknesses: | None At All | | Similar Products Used: | Yeti riser bar, Easton EA70 and Easton CT2 | | Bike Setup: | Jekyll 600 SL, XTR coponenents(upgraded from original coponents) avid mag levers and breaks. Fox Float Rc w/lockout rear shock and Ultra Fatty DL front shock. I likes the color of the 600 so i just upgraded it to a 3000SL | | Bottom Line: | This is a phat product. Especially when lightness matters. | | Value Rating:Overall Rating: |
Submitted by
Jez Ash
a Cross Country Rider
from Pyrenees, France
Date Reviewed: February 21, 2000 | | Favoriate Trail: | anywhere with plenty of loose dirt | | Duration Product Used: | 1 Year | | Strengths: | v v light, with seemingly no penalty in strength or toughness. looks pretty cool, and doesn't scratch easily. damn good value | | Weaknesses: | none i've found as yet | | Similar Products Used: | some old ritchey s***, stock issue bars | | Bike Setup: | hardtail saracen with fatty r's | | Bottom Line: | can't fault it | | Value Rating:Overall Rating: |
Submitted by
Diogo
a Cross-Country Rider
from Rio de Janeiro
Date Reviewed: October 25, 1999 | | Duration Product Used: |
6 months | | Strengths: |
no flex,light,Black | | Weaknesses: |
none | | Similar Products Used: |
Syncros
Titec | | Bike Setup: |
Raleigh M800 , Judy Sl,XTR group | | Bottom Line: | Very cool handlebar | | Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|
