|
|
|
|
Buy and Sell the from our Classifieds.
|
Shop for Similar Products
|
|
|
|
|
|
|
|
| |
Submitted by
Ian Bell
a Downhiller
from Massena, NY, USA Date Reviewed: February 16, 2006 | | Favorite Trail: | Whiteface Mtn | | Duration Product Used: | 2 Years | | Price Paid: |
$10.00 | | Purchased At: | High Peaks Cyclery | | Strengths: | For the average rider, these skewers will work fine, and they can take on the big mountain, just ride a little conservative. | | Weaknesses: | I stripped out the front skewer after changing a tube. | | Bike Setup: | 1998 HardRock comp, xt setup, manitou ti spring forks | | Bottom Line: | They're a good product for an average rider and more or less an introductory product. You really have to crank on them and their kind of tough to take off, but at $8.00 per skewer, im not complaining too much. you get what you pay for. | Value Rating: Overall Rating: |
Submitted by
kFanghe
a Cross Country Rider
from TO Date Reviewed: July 18, 2000 | | Duration Product Used: | 2 Years | | Strengths: | Light and cheap on sale | | Weaknesses: | Extremely sharp edges that are hell on your hands. Cheezy construction | | Similar Products Used: | Shimano | | Bike Setup: | Truth cross country style | | Bottom Line: | These skewers are in short bad. Sharp edges rip your palms apart to the point where it's almost impossible to open the skewer. First time I got them they jammed on me, go figure. They look nice and are light but save your money for something better (i.e. Salsa). You get what you pay for, stay away from $19 skewers especially ones called "Specialized" | Value Rating: Overall Rating: |
Submitted by
Dave
a Cross Country Rider
from Richland, WA Date Reviewed: April 14, 2000 | | Duration Product Used: | More than 3 years | | Strengths: | Cheap, light, looks cool, you can tell people it's titanium, decent levers. | | Weaknesses: | It's titanium, so it's a little flex, I think. | | Similar Products Used: | stock skewers | | Bike Setup: | lightweight XC riding | | Bottom Line: | I dont know. I has this on my M2 Stumpy and the back wheel would keep sliping out unless I really cranked down on the rear skewer, which of course isn't good for the hub bearings. The front wheel can have a little bit of flop, but I think the hub is a stronger factor in that. OK, so now I'm back to a steel frame, and the rear wheel isn't slipping out, and I don't have to crank on the skewer. What gives? Anyway - I'm starting to think people's skewer problems aren't necessarily skewer problems, you know? So - these are typical cheap, semi-sleazy Specialized parts. | Value Rating: Overall Rating: |
Submitted by
PERCH
a Racer
from Los Angeles Date Reviewed: January 25, 2000 | | Duration Product Used: | 2 Years | | Strengths: | Looks and Weight | | Weaknesses: | Sharp edges | | Similar Products Used: | American Classic, XTR | | Bike Setup: | Specialized FSR | | Bottom Line: | The rear skewer every time I woulp hammer down would pull the wheel into the chainstay. Als the aluminum edge where the sit in the dropout completly wore away | Value Rating: Overall Rating: |
Submitted by
John Pentecost
a cross-country rider
from Portland, Maine Date Reviewed: December 17, 1998 | | Bottom Line: | I got these from Supergo for some ridiculously low price, too. They seem to work fine as far as holding my wheels in place, but the back one was a bit bulky and hard to operate in my rear drop out (I ride a Ti Voodoo). Also the front one was so stout that it would not even fit through my new King Hubs, so I had to scrap the skewers and go with an old set of XTR's that seem idiot-proof in comparison. 5 chillies to begin with - 1 for bulkiness - 1 for incompatability = 3 flaming dead horses. | Overall Rating: |
Submitted by
JoBu
a cross-country rider
from FL Date Reviewed: September 4, 1998 | | Bottom Line: |
I, too, bought these skewers out of Supergo on close-out $19. In fact, I've bought 3 sets for 3 different bikes. Sure they have sharp edges but hey, so do the trails. If you are such a pansy that you are worried about the edges of these skewers, maybe you need to be riding along some nice paved bike paths with the other Huffy-people. Get real folks, this is mountain biking (or at least trail biking here in FL) and it's not for the weak. These things rock. | Overall Rating: |
Submitted by
Todd
a cross-country rider
from Dallas, Tx Date Reviewed: August 24, 1998 | | Bottom Line: |
I'm another person that got these for $19 from Supergo. Yes, they are light and cool looking. And they have sharp edges, but so does your crankset, just tuck into a ball in a crash and protect your vitals. But...there was a crash I had where the rear wheel came out of its dropout and FUBAR'd my rim pretty bad. I thought I might have neglected to properly tighten the skewer cam but now I wonder if it didn't just pop open on its own. Four chilis now, but if it happens again, screw the chili system, we're talking litigation!! P.S. Don't even pay $70 for skewers, even if they've hung in the Louvre! They're skewers! | Overall Rating: |
Submitted by
Doug
a cross-country rider
from chattanooga Date Reviewed: March 3, 1998 | | Bottom Line: |
these came stock with my '95 S-works and while they are light and cool looking they function like junk. If you attempt a sprint the rear tire will twist right out of the frame and rub against the chainstay. The same goes for their cool looking seat binder which functioned in much the same way. I replaced these with a simple inexpensive set of XT skewers and have not experienced any problems since then. Ever wonder while you see so many Specialized Accessories on closeout? They make awesome bikes but their components leave a lot to be desired. | Overall Rating: |
Submitted by
Dale Wissman
a racer
from Morgantown, WV Date Reviewed: December 30, 1997 | | Bottom Line: |
I bought my first one when I bought a rear spinergy and was looking for a funky looking skewer to compliment it. Well, i was blown away. Not only does it way NOTHING compared to Shimano skewers, it looks great and is SO easy to operate. It's gets 5 chilies from me. | Overall Rating: |
Submitted by
Lancer
a weekend warrior
from Northridge, CA Date Reviewed: December 24, 1997 | | Bottom Line: |
I purchased these at Supergo for $15 to replace the LX shewers on my son's Diamondback. Not only did I reduce weight but the locking mechanism is much better than the Shimano LX. I recommend them to any lightweights who want to trick their bikes. 5 chilis from me, meet and exceeded my expectactions. A great deal.
| Overall Rating: |
Submitted by
Rob Blomquist
a cross-country rider
from Seattle Date Reviewed: April 21, 1997 | | Bottom Line: |
I got a pair of these one night just before a race, because I snapped a skewer. Really light, and a good price, but the fall apart 'grip rings' fall off the skewer ends making it a hassle to put the wheel on. Its not a safety issue by any means, only a hassle.Performance parts aren't. | Overall Rating: |
Submitted by
Greg Wang
a cross-country rider
from Berkeley, CA Date Reviewed: April 10, 1997 | | Bottom Line: |
I got a set for my girlfriend and I think they are great.From the side of the bike, they look really cool. However, I think the cam may be a bit big, because from head on they are kind of ugly.Performance wise, they have worked and held up like skewers should. If there a wear problems, people may have defective sets or may be tightening them too far. They tighten sort of like the Salsa's do, so you have to do it right. | Overall Rating: |
Submitted by
Alec ODoherty
a racer
from Canada Date Reviewed: January 17, 1997 | | Bottom Line: |
light stupid shape wear and open by themselves with time
| Overall Rating: |
Submitted by
eric
a cross-country rider
from Seattle, WA Date Reviewed: August 27, 1996 | | Bottom Line: |
Replaced the XT skewers that came with my bike with these. I got a good price at my LBS ($35), considering the skewer is Ti. They work fine but have a somewhat vague feel when tightening the nut, meaning that I'm never quite sure when to cinch the lever over. That was never a problem with the XT skewers. Also, the lever itself is really big, with sharp edges. Not a huge deal, but it doesn't fit well with my Judy when the lever is closed - it needs to sit at an angle that isn't parallel with the fork blade. | Overall Rating: |
Submitted by
T. Moore
a cross-country rider
from Maryland Date Reviewed: June 7, 1996 | | Bottom Line: |
I got the new Specialized version mainly because they look great and they match my Specialized. The stock Shimano skewers work well, but they look real dull. I will be sad when I spill and the new releases get sratched by either a rock, root, or tree. Five stars! | Overall Rating: |
| |
|
Photo Caption Contest
(sponsored by Maxxis)
|
Enter here
|
|
|