Home | Reviews | Hub | SRAM

SRAM X7 Rear Hub

0/5 (0 Reviews)
MSRP : $55.00


  • Store Price
    Buy Now
    Buy Now
    Buy Now
    Buy Now
    Buy Now

Product Description

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's X7 hubs will leave a smile on your face. An aluminum hubshell with...

There have been no reviews posted yet for this product. Be the first by clicking Submit a Review

2014 X7 rear shifter HELP!!!!!!!!!!

What started as a simple cable change has turned into a nightmare. In futzing with the up shift mechanism to replace the spring, I managed to loosen and dislodge the downshift mechanism. Long story short, I had to take the whole thing apart. The instruction manual online is for 2013 and older. T ... Read More »

X7 rear hub play

I have a new wheelset on my new Turner Burner that is an X7 rear hub on wtb frequency i25. The 142x12 axle seems to fit tight and the dropout/hanger is also tight but there is lateral play in the hub it feels like bearing play. This wheel has only one 4 mile ride. I'm not familiar with these hubs an ... Read More »

x7 10spd clutch rear mech

Ok so I have a brand new x7 10sp type 2 rear mech and it has ~0.03inches of play at the attach pivot(in and out along the axis), this also allows a lot of wiggle at the pulleys(like a worn out der.), comparing to my XO, which has no play at all i can't see how this is normal, and I can't imagine it ... Read More »

Sram X7 rear derailleur parts upgrade

I have a used sram 10 speed X7 rear derailleur that I use for my 1x10 drivetrain and I was just curious if I upgraded the parts on the derailleur (springs, pulleys, etc.) if I could get cleaner, tighter shifting for a more cost effective price than for an X9 of X0 upgrade.Read More »

SRAM x7 Rear Derailleur went slack?

I was on the trail the other day going down a bumpy section and my chain flew and I had no control over the derailleur. After further inspection everything seems to be working fin except for the internal spring which is not doing it's job. I took it apart and looked at it and it seems to be in worki ... Read More »

Read More »



 

Contests







   

MTBR on Facebook