Product DescriptionThe Sette DH 20mm 32 Hole Hub is the answer to all of your down hill-front wheel needs. It featured an International Standard 6 bolt disc mount, and allows use with a 20mm thru axle and 32 hole rim. It weighs 249g and the heavy-duty cartridge sealed bearings will keep you rolling smoothly drop after drop.
There have been no reviews posted yet for this product. Be the first by clicking Submit a Review
Related 20mm Front Hub Forum Posts
Hi guys, I have an Easton Havoc AM (non-UST) wheelset and one of the 20mm end caps for the front hub got lost when I shipped my bike (thanks FedEx). I believe the year model is 2008 but I'm not 100% positive. I'm hoping that someone has this part laying around as I've called Easton and they do not ... Read More »
So I have a 20mm front hub that is running a bit rough to say the least. I was wondering if anyone had some advice on how to replace the bearings? The end caps don't seem to pop off. There is an aluminum sleeve in the center but I'm not sure how to access it. ThanksRead More »
1. cannot get the end caps off used 20mm maxle to grip end caps from the inside, but they just won't budge. . I yanked and cranked but the maxle would slip out any ideas guys? got another 20mm hub and the end caps came off quite readily. 2. Replacement bearing suggestions? enduro? phils? ... Read More »
I have recently built up a new bike using a Sun Ringle' Charger Expert wheelset.The front wheel came with adapters for 20mm, 15mm and 9QR. I used the 20mm option, and have decided I don't like it one bit. The adapters are a royal pain to deal with every time I put the wheel on, so I want to re-build ... Read More »
My front hub is terrible, the bearings go loose after just a few months (brand new bearings each time) and the wheel rattles from side to side, which is just a horrible feeling. I have a 20mm thru-axle, Revelation Team fork, the hub is Scott branded, not sure what the actual manufacturer is. I want ... Read More »