Home | Reviews | Hub | CODA

CODA Expert Rear Disc Hub Hub

2.8/5 (5 Reviews)
Weight : 365 grams


Product Description

  • Forged 6000 aluminum shell
  • Canted flanges reduce spoke head stress,increasing spoke lifespan
  • CNC'd one-piece aluminum axle
  • CNC'd aluminum axle ends with steel knurled washers
  • Sealed cartridge bearings
  • Bearing seals pressed onto axle ends
  • Designed for use with CODA Disc brake systems
  • 32H


  • Review Options:  Sorted by Latest Review | Sort by Best Rating

    Reviews 1 - 5 (5 Reviews Total)

    User Reviews

    Overall Rating:4
    Value Rating:4
    Submitted by eric a Weekend Warrior from singapore

    Date Reviewed: December 12, 2002

    Strengths:    no problems after thrashing 2 sets of rims and spokes

    Weaknesses:    wats wrong with all the complain.guess they r juz plain unlucky

    Bottom Line:   
    it did not give me any problems nor affected my riding. whoever says its from taiwan.go to the DTswiss website n u know the truth.the only thing bad is lack of colours.

    Expand full review >>

    Favorite Trail:   anywhere tats fun

    Duration Product Used:   2 Years

    Similar Products Used:   dt swiss

    Bike Setup:   01 cannondale f700.mavic 317,dt titanium spokes,full xtr,magura marta,easton carbon bar n seatpost,maxxis flyweight330

    Overall Rating:3
    Value Rating:3
    Submitted by sCoda Crack-and-fail a Weekend Warrior from Finland, Europe

    Date Reviewed: October 18, 2002

    Strengths:    Industrial bearings, quite light

    Weaknesses:    Orig. bearings and freewheel, 4-bolt disc

    Bottom Line:   
    XC weight saving taken to maximum with the original bearings; one ball missing... ;o)

    After changing the original freewheel (broke after few hundred ridden kilometers) to SRAM and the original cheap crap bearings to decent ones have this hub done quite well. After those updates I haven´t had any problems with these wheels what comes to hubs (but the Expert rims are made from butter-like alloy and the spokes, snap-cracle-pop)...
    With new rims and spokes these hubs might be under my bike, but the original setup is now waiting for the day if/when I broke another wheel in use. And only for temporary "first aid" use...

    Attention: Chilis given to the modified hub!

    Expand full review >>

    Favorite Trail:   Not yet been there...

    Duration Product Used:   1 Year

    Purchased At:   Came with C-dale SV700

    Similar Products Used:   Magura LouisePro, Shimano XTR/XTdisc/XT/LX, Mavic X-Link

    Bike Setup:   C-dale SV700 -00 (Europe), Finnpeak fpc-02

    Overall Rating:1
    Value Rating:1
    Submitted by Greg a Cross Country Rider from Alberta

    Date Reviewed: July 14, 2002

    Strengths:    It's ok...I guess. The whole bike is wonderful- only weakness is in the braking system and hubs.

    Weaknesses:    Like most Cannondale "innovations", there are many problems. The latest in my string of bad luck with my Coda bits involves the replacement of my freehub body. Only Coda tools, and a Coda freehub body will work with this crappy, now defunct system....and a nice three week wait to get the parts shipped here is what I have to look forward to! I am sick of all of the problems with my Coda system!

    Bottom Line:   
    Any one looking at discs.....steer clear of Codas!
    Cannondale has a great warranty, and their techs at HQ are very helpful....but come on guys.....the recall list on the Cannondale site is as long as War and Peace. My first set of Coda competition discs leaked hydraulic fluid- they were promptly replaced with the new "Comp" version. Not as many problems with these....but they are still problematic. I am also very disappointed in the entire process of a simple repair/replacement. The whole Coda disc brake system(Levers, hose, calipers, hubs) was/is a big failure!

    Expand full review >>

    Duration Product Used:   2 Years

    Bike Setup:   1999 Cannondale F900

    Overall Rating:4
    Value Rating:4
    Submitted by lloyd a Cross Country Rider from pasig

    Date Reviewed: July 4, 2002

    Strengths:    it's light

    Weaknesses:    (this is just a follow-up for my review)
    it's still a 4-bolt hub


    Bottom Line:   
    just a follow-up...i can't blame myself for deciding immediately about its faults. i guess we're all learning and being educated with the products we're using. just a small note,,,the bearing specified by CODA is KB6000 and KB6200. well if u'r going to buy this at cannondale it's like ur buying gold. this bearings are actually made by SKF. so for KB6000 = 6000-2RS1 and for KB6200 = 6200-2RS1. i bought this both at about US$2/ea.
    i have no complain with the housing n d axle...it's just d bearings. better replace all when 1 of d bearing break.
    i upgraded my rating...but it's still 4 flamin' chillis 'cos of the 4-bolt pattern.

    Expand full review >>

    Favorite Trail:   bukit timah

    Duration Product Used:   1 Year

    Purchased At:   comes with the bike

    Similar Products Used:   dt swiss hugi disc hub

    Bike Setup:   cannondale f700

    Overall Rating:2
    Value Rating:1
    Submitted by lloyd a Cross Country Rider from pasig city, philipppines

    Date Reviewed: April 6, 2002

    Strengths:    you can use it

    Weaknesses:    as i said, you can still use it before it gives you a lot of trouble

    Bottom Line:   
    i have read a lot of reviews with this hub. unfortunately this is my very best review in this website. just wanna read those comments, and i'm quite happy that it really help those guys who buy and upgrade a lot. for my experience after 1yr of using this hub, i guess it's starting to give you the maintenance it needs.

    it started to give me a grindind noise whenever i do a freewheel,,,so i checked it and as everybody had said, it's no surprise...the sealed-cartridge bearing in the non-drive side is not smooth anymore, well i don't want to inspect and elaborate further...the bottomline is when you have this product,,,use it, then you decide whether give her another chance for maintenance or replace it with other reputable products. for my part, the 4-bolt pattern is really making me sick. i might give her another chance, just replace the cartridge-bearing one more time...then afterwards, let's wait for my next review.

    for the meantime, don't buy this separately...if it comes with your bike,,,your a lucky guy! i'll give her 3 flamin' chillis 'cos she served me for 1yr.

    adios!

    Expand full review >>

    Favorite Trail:   bukit timah, bagac trail, daraitan trail

    Duration Product Used:   1 Year

    Purchased At:   comes with the bike

    Similar Products Used:   xt hubs

    Bike Setup:   cannondale f700 2001 (mainly no more CODA stock!)

    Reviews 1 - 5 (5 Reviews Total)

    Review Options:  Sorted by Latest Review | Sort by Best Rating

     

    EUROBIKE





       

    MTBR on Facebook