Submitted by
illcomm33
a Cross Country Rider
from Colorado Springs, CO Date Reviewed: June 25, 2010
Favorite Trail:
Falcon Trail, Captain Jack's
Duration Product Used:
3 months
Price Paid:
$250.00
Purchased At:
Bikewarehouse + Ti S
Strengths:
Lightweight, sexy, lightweight, good q-factor (after upgrading spindles)
Weaknesses:
Break easy....weak springs....gauge the bottom of your shoes (unless you spend even more money buying the shoe shield....don't you think that should be part of the purchase anyway?) cost!
Similar Products Used:
Been running Crank Bro's for 8+ years. SPD before that.
Bike Setup:
Spot Longboard 29er SS belt drive.
Bottom Line:
Sad day for sure. I have been a crank bro's fan for YEARS and have gotten tons of friends hooked on the eggbeaters. Now I have to leave a bad review for some crazy expensive pedals that failed me way too quickly.
Started with C's and moved to SL's. All my bikes are outfitted with Crankbro's (eggbeaters for MTB & Candy's for Cross/Commuter/road)Just for the record I will keep those pedals...but will not use eggbeaters for MTB anymore.
More than a few warranty issues over the years didn't bother me too much (broken wings, springs wearing out) especially since Crank Bro's took care of things quickly I was ok dealing with the frustration. They are sweet pedals right!
Enough of the past...now for the 2ti review.
Spent a good chunk of change on the 2ti's and then upgraded the spindle's with Ti Spindle (Excellent spindles!) Less than 3 months of riding the spring on the left pedal broke (during a race no less....on a non technical course...not a rock insight) I mainly ride non-rocky singletrack...I don't bash pedals.
Frustrated again I went to the Crank Bro's site to call and discuss warranty situations...only to find out the RA (Return Authorization) is now a completely automatic process.
Does this say enough about quality? Seems to me that the overall warranty requests were too much to handle so CB went to a "fill out the warranty info and send em in....we will just fix them and send them back..."
After thinking about how much $$ I have spent over the years sending pedals back to Cali for warranty I decided enough is enough.
Should have listened a few buddies (SPD-XTR pedal guys) who have said CB quality is poor. They too had ti, 2ti or 4ti and switched after "sloppiness" between pedal/cleat issues and were suffering from unintentional un-clips.
Going to give the XTR pedals a shot...heck they were 1/3 the cost of these pedals and probably won't let me down when I need them.
If you are looking for a sick race day pedal that is crazy light these are for you. I wouldn't recommend them for an everyday pedal though.
Value Rating:Overall Rating:
Submitted by
bigring22
a Cross Country Rider
from Richmond,VA Date Reviewed: March 7, 2010
Duration Product Used:
2 Years
Price Paid:
$270.00
Purchased At:
don't remember
Strengths:
light, easy to get in and out of, good with mud.
Weaknesses:
breaks easiily
Similar Products Used:
SPD is the only non-Crank Borthers pedal I have used. I have used several different eggbeater pedals before the 2 Ti.
Bike Setup:
Carbon Titus Racer X
Bottom Line:
I have had used eggbeater pedals for several years for recreational riding, and racing and have liked them. They have been reliable and good for some of the extreme conditions I have raced in. I am pretty careful rider and don't hit my pedals off logs, rocks etc. Since buying the 2Ti model I have broke the spring that holds the pedal together twice (the last time being today). The down side to this pedal is that since it doesn't have a platform if the pedal breaks you have nothing to safely rest your foot on. I will rebuild these from some old pedals but will definately switch pedals before the racing season start this year.
Value Rating:Overall Rating:
Submitted by
john
a Racer
from east berlin, connecticut,usa Date Reviewed: May 20, 2007
Favorite Trail:
west hartford
Duration Product Used:
2 Years
Price Paid:
$150.00
Purchased At:
ebay
Strengths:
lightweight, easy to clip in, sheds mud
Weaknesses:
unwanted clip outs, no platform, and um..unwanted clipouts
Similar Products Used:
ritchey, times
Bike Setup:
ellsworth truth, race build
Bottom Line:
The unwanted clipouts I had pretty much gotten used to except on rocky fast downhills, where paying attention to the pedals is a must. I don't think these are the best pedals for highly technical riding. I think they are good for racers on relatively smooth courses. I had to switch back to my Time ATACS for comfort due to a nerve problem in my foot. I definitley feel more stable with the Times and prefer them to the eggbeaters. Unfortunatley the Times are significantly heavier. I will be trying the Candy 4 ti ot he Xs Carbon Ti's by the end of the year.
Value Rating:Overall Rating:
Submitted by
Mike
a Cross Country Rider
from OC CA Date Reviewed: April 30, 2007
Favorite Trail:
Any
Duration Product Used:
3 months
Purchased At:
Came with bike
Strengths:
Light weight. Simple design. Easy to clip in and out.
Weaknesses:
Makes noise, ticking from right pedal, creaking from under the shoes.
Similar Products Used:
xtr 959's
Bike Setup:
Carbon Epic
Bottom Line:
I tried these since they came on a bike I bought. They were definitely light weight and simple in design. I mounted these along with new cleats and after two rides the right pedal started to make a ticking noise and both started to creak like the pedal rubbing against the bottom of my shoes. Tried some dry lube and some other lubes with no luck. Retail on these is something like $200. I can't see spending that much for something that sounds like it's falling apart. I have been riding the 959's for over a year with NO problems whatsoever. I'll stick with the 959's.
Value Rating:Overall Rating:
Submitted by
Darren
a Cross Country Rider
from Moose Jaw, SK, Canada Date Reviewed: April 3, 2007
Favorite Trail:
Trans Canada Trail
Duration Product Used:
3 months
Price Paid:
$220.00
Purchased At:
E-bay
Strengths:
Light, strong.
Weaknesses:
Cost and the paint on the wings and body washed off with water. A $200 pedal that looks like a cheapie after a few rides. Crankbrothers won't do anything to help even when they admitted that it happens to all of 'em. Crap paint.
Similar Products Used:
Shimano 959 and 520.
Bike Setup:
Ibis Mojo. All '07 XTR, custom painted Industry Nine/DT Swiss 4.2 wheels. Fox RCL 140, Fox rp23.
Bottom Line:
They function well but look like crap after a few wet rides. If I wanted cheap crap I'd buy cheap crap. Why are my expensive pedals looking like cheap crap? If you like your stuff to look good longer than 2 weeks avoid the twin ti's. Thumbs down to Crankbrothers quality control dept.
Value Rating:Overall Rating:
Submitted by
dan
a Racer
from great falls Date Reviewed: March 30, 2007
Duration Product Used:
1 Year
Price Paid:
$160.00
Purchased At:
pro form
Strengths:
weight, strength, function
Weaknesses:
small surface area??
Similar Products Used:
Shimano
Bike Setup:
07 anthem, full XO/XTR with Stans wheels, SID world cup
Bottom Line:
I won't ride anything but egg beaters now days. I rode the cheap ones for a year and got the twin ti's last year, sold them with my bike and bought the 4 ti's this year and a pair of the Sl's. The pedals function great with mud clearing and have good float in them. Bottom line: Great pedals, and I was hard on the twin ti's and they held great.
Value Rating:Overall Rating:
Submitted by
simon chetwynd
a Cross Country Rider
from newbury, uk Date Reviewed: December 28, 2006
Duration Product Used:
6 months
Price Paid:
$350.00
Purchased At:
LBS
Strengths:
Really lightweight, don't clog up in even the foulest mud, very easily serviced, rebuild kit available.
Weaknesses:
Straight out of the box (aka flashy tin) the clamping force on the cleats was far too high. A ride and a squirt of WD40 fixed this, they've been fine ever since. Note that you can't adjust the springs. The seals aren't the greatest, I had to strip a pedal down not long after I had it. That said, cleaning it, regreasing it and putting it back together without using a rebuild kit fixed it.
Similar Products Used:
Shimano, Richey, and others I can't remember. All of them clog up with mud.
Bike Setup:
Giant NRS 3, Rockshox Reba forks, Shimano XT group set
Bottom Line:
If you want a lightweight pedal that won't clog up under any conditions, then this is the biz. Very easily serviced as well. Not exactly the cheapest pedals going though.
Value Rating:Overall Rating:
Submitted by
Matthew Morgan
a Racer
from Houston Date Reviewed: September 22, 2006
Favorite Trail:
WACO
Duration Product Used:
2 Years
Purchased At:
Team Purchase
Strengths:
Very Light, Very simple entry and exit. No amount of mud will clog the simplistic design. with 4 entry point there no feeling around for the pedal engagement.
Weaknesses:
None you can't find a better pedel
Bottom Line:
I wouldn't even try another pedal since I started using these. There is nothing on the market like them.
Value Rating:Overall Rating:
Submitted by
Ben
a Cross Country Rider
from Victoria, Australia Date Reviewed: August 29, 2006
Duration Product Used:
2 Years
Price Paid:
$180.00
Strengths:
4 point entry, weight.
Weaknesses:
they are not designed to last. over time there is too much pressure on the interior of the pedal. allows build-up of dirt and grit. requires ongoing maintenance.
Similar Products Used:
shimano
Bike Setup:
epic comp 05
Bottom Line:
one word...pathetic! Sure for the first 6 months-1 year i was wrapt, but then the problems started. the build of the pedal is just not designed to handle mtb riding. i had to re-build the pedal twice in 6 months - i finally gave up on them when part of the pedal became detached from where it attaches to the crank. i've had numerous guys tell me of their problems with crankbrothers pedals.
back to shimano for me...
Value Rating:Overall Rating:
Submitted by
Hank
a Cross Country Rider
from Tucson, AZ Date Reviewed: August 18, 2006
Favorite Trail:
50-Year & its tributaries
Duration Product Used:
2 Years
Price Paid:
$120.00
Purchased At:
eBay
Strengths:
Strong, light, maintainable, consistent clipping, great customer service (see below)
Weaknesses:
What? Ok, the stupid little anodized sliding case they come in... looks cool, but unnecessary... pack 'em in a cardboard box and save the consumer a few $$$. A BIG waste if you ask me...
Similar Products Used:
Shimano, Wellgo, Egg Beater C's
Bike Setup:
Titus Moto Lite
Bottom Line:
I'm prefacing by saying that I'd been using Egg Beater C's on my previous bike for about two years. When I got my Titus last spring, I didn't want to keep swapping pedals so got a steal on eBay and am set...
Customer service: Crank Bros is awesome... on the C's, I broke a spindle hitting a rock, called them, got a return order number, and had a repaired/new pedal in about a week. No problems since. It was the stellar performance and service with the C's that lead me to the Twin Ti's.
I would have opted for the 4-Ti's, but they caution a rider weight limit at 180#, and I'm just under that, and ride aggressively, so I opted for the Twins. Not to be disappointed.
My experience with Egg Beaters has been stellar. At first, I was worried about the stability of the "platform" if I decide to unclip in rough sections... sheesh... I quickly learned that unclipping is unnecessary... if a quick bail is needed, they come right out without hesitation - but that said, I have *never* had them unclip by mistake (something I can't say about my Shimano's, which resulted in a nice little scar on my arm). Being 4-sided, you can clip in and go very quickly (even when mounting on an uphill - which comes in very handy!). They gather *no* mud... sheds very easy... cleans easy...
These things are just awesome... I'm surprised that everyone isn't riding Egg Beaters! (If you need a platform, try the Candy's...)
Value Rating:Overall Rating:
Submitted by
Kevin
a Cross Country Rider
from Sherman Oaks, Ca. USA Date Reviewed: September 11, 2005
Favorite Trail:
Caballero to PCH and back
Duration Product Used:
Less than 1 month
Strengths:
Light, strong, simple.
Weaknesses:
Zero
Similar Products Used:
candy ti's, shimano 747
Bike Setup:
Titus Talus SB, Chris King HS, Thomson post and stem, Easton monkey lite xc bars, Sram X.0 rear derailer and grip shifts, XT BB Crank and front derailer, Manitou Minute 3 IT forks, DT240s w/ Mavic 819 ust wheels, El Camino brakes, Crappy Kenda Charisma UST tires.
Bottom Line:
These are the best pedals I have ever tried. It does take a little bit of practice to clip in, but after you get the location of the shoe clip to the pedal, you are in heaven. Entry and exit is easy, and quick. I was able to restart on a very steep hill without any problems concerning the pedals. If you want something light, easy to rebuild and maintain, and dependable, and light without any weight limitations, buy these pedals now. You won't be sorry.
Value Rating:Overall Rating:
Submitted by
Neil Statz
a Racer
from Wisconsin Rapids Date Reviewed: October 8, 2004
Duration Product Used:
6 months
Price Paid:
$300.00
Purchased At:
campus cycle
Strengths:
lightweight, clears mud, easy entry, customer service
Weaknesses:
none
Similar Products Used:
shimano spd
Bike Setup:
2000 trek stp 400
Bottom Line:
I used these pedals in a 12 hour race that was almost all rock singletrack.I beat the living #@%$ out of them and they held up under all the impacts and crashes that day. After the abuse I put them through, I checked out my bike, and found I bent the spindle on the left pedal. I had my bike shop call crank brothers and tell them I needed to buy a set of spindles, because I felt I had damaged them and it was no fault of theirs. They sent me two free spindles, and I had them in three days! What a customer service department. I highly recomend these pedals.
Value Rating:Overall Rating:
Submitted by
Noe
a Cross Country Rider
from Houston Date Reviewed: July 24, 2004
Favorite Trail:
The Ant Hills, Memorial
Duration Product Used:
3 months
Price Paid:
$168.00
Purchased At:
Ebay
Strengths:
Featherweight, Cool Looks, Easy clipping in and out, Crank Brothers Quality
Weaknesses:
No Platform
Similar Products Used:
Shimano SPD M520
Bike Setup:
Stumpy 04 Hardtail
Bottom Line:
This is the first set of Eggbeaters I have. I was fairly satisfied with the Shimano's until I became obsessed about my bike's weight [it's now down to 24 lbs..]. Clipping in and out is a breeze AFTER you break them in. I found out about this the hard way. I'm not too impressed with the mud clearing ability, I think the Shimano's could do just as well. Where the Eggbeater shines I think is how easy you can unclip[which can also be a bad thing..]compared to the Shimano. Besides with a pair of these you'd look cool to your non biker friends.
Value Rating:Overall Rating:
Submitted by
Jason
a Cross Country Rider
from Decatur, Georgia Date Reviewed: May 17, 2004
Favorite Trail:
Bull Mountain
Duration Product Used:
3 months
Price Paid:
$145.00
Purchased At:
e-Bay
Strengths:
Light weight, easy entry and exit, durability
Weaknesses:
none yet
Similar Products Used:
spd's, original egg beaters
Bike Setup:
Cannondale hard tail, XT components
Bottom Line:
I upgraded to the twin ti version from my original egg beaters after I got an awesome deal on e-bay (would never give the 5 flames for value if I'd paid retail--no pedals are worth that much to me). I've used egg beaters for 2 1/2 years now, and have never had a single problem. Not only are these lighter than the original stainless version, but clipping in is, if anything easier. Sweet pedals!!
Value Rating:Overall Rating:
Submitted by
Jeff
a Weekend Warrior
from Ellicott City, MD Date Reviewed: January 17, 2004
Duration Product Used:
3 months
Price Paid:
$200.00
Purchased At:
LBS
Strengths:
Easy entry and disengagement. Never have a problem engaging in any conditions.
Weaknesses:
None
Similar Products Used:
Bontrager RE-1, Shimano 959, Wellgo, Crank Bros. Mallet C
Bike Setup:
Jamis Dakar frame, XTR shifters, everything else XT, Manitou Minute 2:00 and Swinger 3-way, Twin ti pedals
Bottom Line:
Never having tried Time pedals, I can't compare to those, but compared to SPD, Eggbeaters are the by far the best. Living in an area where mud and nasty conditions are common, I have yet to have a problem using these pedals. There were times (snow) where I could not even get into my SPD pedals after the cleats were packed with the elements. Not a problem with the eggbeaters.
Value Rating:Overall Rating:
Submitted by
Weiwen
a Cross Country Rider
from Ann Arbor Date Reviewed: March 31, 2003
Duration Product Used:
Less than 1 month
Price Paid:
$175.00
Purchased At:
eBay
Strengths:
light weight, easy of entry
Weaknesses:
relative lack of float (used to Speedplays on the road), the freakin' price.
Similar Products Used:
'02 Beaters
Bike Setup:
Giant SE1, Mars Super, mostly LX/XT, Cane Creek WAM Discs with Avid discs
Bottom Line:
these can be had "cheap" on eBay. they function exactly the same as the old egg beaters: relatively small platform, but great ease of entry and mud clearance. the bearings are of course improved over the old version, and there is a grease port. the weight shaved over the 'old' egg beaters isn't really cost effective. of course, when must have all the cool stuff, one gets all the cool stuff, and these are less extravagant than the triple tis. were I sane, I would recommend simply getting the SS version of the new egg beaters once they come down in price a little.
Value Rating:Overall Rating:
Submitted by
Anonymous Gerbil
a Weekend Warrior
from Texas Date Reviewed: March 11, 2003
Duration Product Used:
Less than 1 month
Price Paid:
$200.00
Purchased At:
MTNHighCyclery.com
Strengths:
Great performance in the mud, lightweight, simple design, improved sealing for 2003, grease port
Weaknesses:
None that I can think off. I got 'em for a good price, so other than costs, really nothing. Fancy anodized aluminum box probably adds to the cost though is overkill
Bottom Line:
I have been using the Twin Ti versions of the eggbeaters for about a month now. I had my first ride in some really muddy conditions last weekend, and the eggbeaters lived up to their reputation. At certian points in the ride my bike shoes were completely covered with the type of mud that has the consistency of peanut butter, but I never had a problem clippin in during the whole ride. The eggbeaters did their job. The 2003 models now come with better sealing and an improved, supposedly stronger stainless steel axle. And the Triple Ti and Twin Ti come with a grease port applicator for easy 1-minute maintanence.
The fancy blue anodized aluminum box that the pedals came in looks like it probably adds another $5-$10 dollars to the MSRP. Something I could do just as well without. Oh well, nice box to put stuff in I guess.
Like all eggbeaters, there is no platform there for you to ride unclipped. But at this low weight, and the great performance in the mud, one really cannot complain.
Get these pedals if you have the money. If not, the cheaper full steel versions provide the same level of performance for a lot less money and just little more weight.
Value Rating:Overall Rating:
What's New
»
Bike Press Camp - See the latest 2011 bikes, parts and gear featuring Scott Sports, Cannondale, Mongoose, Fox, WTB and more»
$ 300.00
Overall Rating:
Overall Rating:
Overall Rating:
Overall Rating:
