SRAM S1000 Crankset

0/5 (0 Reviews)

Product Description

  • Arm Material: AL-6066-T6
  • Compatibility: 10 speed chains
  • Bar Clamp Diameter: 64mm/104mm

There have been no reviews posted yet for this product. Be the first by clicking Submit a Review

Sram s1000 PF30 compatibility issue

I have a 2013 Spearfish that utilizes a PF30 bottom bracket. I just bought a Sram s1000 (pf30/bb30) crankset. My issue is that the spindle appears to be too long to work with my bottom bracket, at least without using a large amount of spacers. I admit that I'm not well versed in all of these newe ... Read More »

What replacement chainring for OEM Sram S1000 crank?

Hi there, Am converting my Trek X-cal from 3x10 to 2x10. Gonna Go Cheap and just take off the large ring and would like to swap out my middle 33T ring for a slightly larger one( 36T) for higher gearing since I won't have my large ring, not to mention that the middle ring is fairly worn after a c ... Read More »

SRAM S1000 what group is it in?

As the title says, I'm curious where the S1000 cranks fall in the different levels of SRAM components? Are they in the X5 line? x7 line? I've searched google and SRAM's website w/o much success. Thanks!Read More »

New sram s1000 crank bolt keeps coming loose!!

Bought my flash 2 alloy couple of weeks ago and notice the drive side crank bolt was very loose. About 2 rides later it was wobbeling around again. Checked again and it took another almost full turn. Now i dont have a torque wrench so it could be that im being to nice to it. But is this a common ... Read More »

Sram s1000 2x10 question

Hello, i've got this crank on my Meta sx. Do you know if is it possible to put a 36 x 24? [IMG][/IMG]Read More »

Read More »




MTBR on Facebook