Home | Reviews | Crankset | FSA

FSA Dyna Crankset

4.5/5 (2 Reviews)


Product Description

  • Die cast alloy crankarms
  • Monocoque design
  • CroMo chainring bolts
  • 9 speed
  • Chainrings: 22/32/44t
  • Q-Factor: 170mm
  • BCD: 104/64mm
  • Chainline: 48mm (JIS Square 110.5mm), 50mm (JIS square 113mm)
  • Black anodized
  • Weight: 887g
  • Chromoly chainrings


  • Review Options:  Sorted by Latest Review | Sort by Best Rating

    Reviews 1 - 2 (2 Reviews Total)

    User Reviews

    Overall Rating:4
    Value Rating:5
    Submitted by onlycrimson a Racer from Michigan

    Date Reviewed: October 16, 2010

    Strengths:    Cheap, durable, 4 bolt pattern

    Weaknesses:    little bit of flex(not noticeable when riding), weight

    Bottom Line:   
    This crank is cheap and works just like it should. The rings seem good and are easily replaceable as needed. This crank is good for the bike that is going to be used more for general xc riding and not racing as, it's just too heavy for a serious race rig.

    Buy it if cheap and easy is your motto. Forget it if ultra stiff and light is what you need.

    Expand full review >>

    Favorite Trail:   Potowanomi

    Duration Product Used:   Less than 1 month

    Price Paid:    $33.00

    Purchased At:   TreeFortBikes

    Similar Products Used:   Shimano slx, xt, race face ride xc

    Bike Setup:   I put this on my old Catamount urt bike as a replacement.

    Overall Rating:5
    Value Rating:5
    Submitted by John a Weekend Warrior from Montgomery, AL

    Date Reviewed: May 6, 2008

    Strengths:    Cheap, apparently quality crankset. Square taper BB works on my old Schwinn. I'm not a gram junkie, so I don't know if it's a heavy set or not.

    Weaknesses:    Square taper not so in vogue anymore.

    Bottom Line:   
    I'm liking this crankset. It was a cheap replacement for my junked crank. Time will tell if it's a quality piece of equipment.

    Expand full review >>

    Duration Product Used:   3 months

    Price Paid:    $40.00

    Purchased At:   JensonUSA

    Similar Products Used:   Old Shimano STX with the dual mounting hole mid-ring.

    Bike Setup:   Currently on an old Schwinn S-20. May move it to my Woodstock 707.

    Reviews 1 - 2 (2 Reviews Total)

    Review Options:  Sorted by Latest Review | Sort by Best Rating


    What exactly is dyna sys?

    Compatibility is all over the internet but I still don't know exactly what it is. Is it a different cable pull ratio? Different derailleur movement? Spacing? I've no clue. Anyone know? If it matters this would be in reference to front dérailleurs specifically.Read More »

    Is there a Shimano "Shadow Plus" short cage MTB derailleur that's not "Dyna-Sys"

    Is there a Shimano "Shadow Plus" short cage MTB derailleur in a non-"Dyna-Sys" variety for use with 10 speed road shifters for cyclocross? I want a clutch type derailleur for a front single chainring?Read More »

    Is there a Shimano "Shadow Plus" short cage MTB derailleur that's not "Dyna-Sys"

    Is there a Shimano "Shadow Plus" short cage MTB derailleur in a non-"Dyna-Sys" variety for use with 10 speed road shifters for cyclocross? I want a clutch type derailleur for a front single chainring?Read More »

    SRAM Ch. Rings w/ dyna sys Chain

    Who's running SRAM cranks with dyna sys chains and cassettes? All parts are 10 speed. How is the shifting?? Any issues.Read More »

    Convert Shimano Dyna sys 3 x 10 to 1 x 10

    Hi all I am looking to convert my SLX Dynasys 3 x 10 to a 1 x 10 using the Race Face Narrow-wide ring. My questions are: 1. Do I need shorter chainring bolts 2. Will the race face BCD fit the Shimano crank 3. how do I determine how many links to remove from the chain? Any help will be ... Read More »

    Read More »



     

    INTERBIKE

    Contests





    Interbike Featured Booths

    Check out the hottest mountain bike products from these brands!



















    See All Interbike Coverage - Click Here »

       

    MTBR on Facebook