Product DescriptionWe find it easy to like CNC-machined stems. Done right they're light, strong, and good-looking. We like when Twenty6 does it, like the F1.2 and F1.5 stems. These guys ride, invent, modify, improve, sell, improve some more, all in Montana. They started with the F1.2 for 1-1/8" steerers, and also offer the a 1.5" steerer, the F1.5.While we like the whole package, what is unique here is the two-bolt wedge steerer tube clamp. Rather than pinching the steerer with one or two bolts at the back, the wedge gently, gradually, and firmly pushes a wedge out from the stem body into the steerer. The clamping mechanism works separate from the stem itself, so there is no working or weakening of the stem. The sculpted shape is maximally minimal. That is, all the 6061-T6 aluminum you need in places it is needed, and none where it isn't. Rather than go for illusory savings of aluminum bolts, Twenty6 opted for stainless steel. Two stainless M5 Allen-head bolts turn the wedge and four stainless M5 Allen-head bolts secure the face plate to the 31.8mm handlebar clamp.The stem comes in one length 50mm reach with zero rise in two steerer options 1-1/8" (F1.2) or 1-1/5" (F1.5). The stack height for the steerer tube is 45mm. Colors available are: Black, Blue, Brown, Green, Orange, Pink, Red, and Yellow. 168g.
There have been no reviews posted yet for this product. Be the first by clicking Submit a Review
Related Stem Forum Posts
I had a few minor setbacks in my Lefty conversion (scarcity of PBR internals, then my LBS cut the steerer tube too short, lol) but tomorrow I am FINALLY picking the bike up! I was curious about the geometry change- I think my axle to crown or whatever is increased with the Lefty Max? Should I com ... Read More »
Hey guys, I'm new to the forum. Just bought a 2014 Camber 29 Comp, xl frame. 3 days ago I'm 6'4 200lbs. my issue. handlebars are to low for me, feels like I'm leaning to far downward. My Hard Rock has a 22 degree stem with 1/2 riser bar. perfect fit. has anyone installed a 20 degree stem and bar on ... Read More »
Just wondering what everyone is running... Flat bar or Riser? Negative degree stem? A buddy said I would be more comfortable with a negative rise stem and a Falt bar. I thought this was all personal preference. This is my first 29er, on my 26", I ran 90mm stem with a riser bar.Read More »
Some good deals here. I havent gotten one, but thought someone might could use it. Carbon and Alloy stuff. The link is for one of the deals, go to "bundles" to see the others. [url=http://www.on-one.co.uk/i/q/GREMAFX4CC/eddy_merckx_afx4_carbon_finishing_kit]Eddy Merckx AFX4 Carbon Finishing K ... Read More »