Funn Drop Out Brake System

0/5 (0 Reviews)

Product Description

  • 2PC Master Cylinder Clamp
  • Larger Reservoir
  • AL6061 T6 Fully Forged System
  • 2pc Heat Dissipating Caliper
  • Increased Power

There have been no reviews posted yet for this product. Be the first by clicking Submit a Review

Carbon drop out worn away Scott scale 930 2013

Hi, I noticed the rear wheel was rubbing slightly on the left chainstay, after removing the wheel i noticed the carbon dropout on the derailleur side has worn away towards the front allowing the wheel to sit at a slight angle. I'm wondering if anyone has had any experience with successful warranty c ... Read More »

Mavic Crossmax ST 26 10mm drop out/9.5mm QR

I just purchased a Mavic Crossmax ST 26 wheel-set the front wheel is fine but the rear comes with a quick release and 9.5 mm adapters. My BMC Four Stroke FS01 had DT Swiss Xm 1550 with a 10mm through bolt and the dropouts are 10mm and not dished. The hub seems to seat properly but I'm concerned ab ... Read More »

Drop out hanger question

Just bought a new Fantom X7 from BikesDirect, started the assembly process and realized that I was in way over my head. Brought it to a local bike shop - only to be told that the "drop-out hanger" is cracked and unusable. Question: should I return the entire frame? Should I just return the entire ... Read More »

Rear drop out scott scale 730?

Ok so im looking to upgrade the wheels on my 2014 scott scale 730. The front wheel is easy 9mm QR. But when i looked online the rear drop out says ids sl interchangeable. The bolt on the rear says 135 rws 5 on it but it is not your conventional quick release. Can you guys explain what i need for new ... Read More »

on one inbred 29er vertical drop out question

when I install my rear wheel the nondrive side drops right in but the drive side will not fit in. I am using a deore hub 135mm spacing? any suggestions??Read More »

Read More »




MTBR on Facebook