|
|
Performance Performance Spin Doctor Pro Workstand Tools
Product Description
User Reviews
Submitted by
Daniel17363
a Weekend Warrior
from Riverside, Ca., USA Date Reviewed: May 3, 2009 Strengths: Looks good. Weaknesses: Because of the movement of the centering action of the clamp that holds the bicyle the paint will erode and even after a limited number of "clamps" the paint on my bike shows some marks not removed by polish. Sure hold the bike at the correct height and correct angle while clamping either put the bicylce on the stand or taking it off and the problem goes away. A far better way is a clamp where the bicycle is placed on the lower section of the clamp and then the upper section is brought down to hold the bicycle. Spin Doctor should offer a replacement for the current "sure to erode" version. Bottom Line: Expand full review >>Duration Product Used: 3 months Price Paid: $149.00 Purchased At: PerformanceBike  
Submitted by
Philip
a Weekend Warrior
from San Diego, CA Date Reviewed: April 26, 2006 Strengths: Strong, stable base but has some flex if fully extended, but that can be expected. What many people don't consider is that this stand extends quite a bit higher than other comparable quality stands. This is a great feature if your a tall rider working on your bottom bracket or rear der. Buy an outboard tool tray for it, then make a wall mount for the tray so you have a place to put it when you fold up your stand. No need to take out your most used tools. I highly recommend anyone with a carbon fiber bike NOT buy a stand with a quick release clamp (like the Parks), too much risk of crushing your frame. The few extra seconds of turning the knob to the correct tension will save you a lot of heartache. Weaknesses: Some flex when fully extended. Pretty much unusable parts bin on clamp assy. Hard plastic pads in clamp should be replaced with a little softer urethane. Bottom Line: Expand full review >>Favorite Trail: Sycamore canyon Duration Product Used: 6 months Price Paid: $130.00 Purchased At: Perf. Kearny Mesa Similar Products Used: Several Parks, one Ultimate which I returned to exchange for this one that was $25 less.
Submitted by
Ray
a Weekend Warrior
from Cumming, Ga, USA Date Reviewed: April 9, 2006 Strengths: This review is for the Spin Doctor Pro G3 Repair Stand. I have found this to be a very stable stand of good build quality. The handle design for the clamps are easy to adjust with one hand. The base is very stable when extended and the unit folds up well for storage. Weaknesses: The frame/seat post clamp is smooth plastic. I have not had a problem with slipping or scratching, but a rubber surface would be better. Bottom Line: Expand full review >>Favorite Trail: Fort Yargo Duration Product Used: 3 months Price Paid: $130.00 Purchased At: Performance Bikes Roswell Similar Products Used: Spin Doctor Team Workstand (poorly designed and built) Bike Setup: I have used this stand with 20", 24" and 26" bikes.
Related Performance Spin Doctor Pro Workstand Forum PostsPerformance - Spin Doctor pro workstand $54.99 for team members until 5/11Sorry - performance fixed their mistake |
Contests
VideosMTBR on Facebook |
