Full-Beam Fusion Lights

0/5 (0 Reviews)

Product Description

No external battery pack, no cables, no messing, just a lot of light in a convenient package. Downhill, All-Mountain, Dirt Jump, Trail, North Shore & XC - Ride to your limit, not to your light’s.

  • 2100 Lumens light output
  • From 7 High Efficacy LEDs
  • Choice of optics to suit your riding
  • Throws light a long way down the trail
  • TBDg total system weight
  • 3 Light Level operation
  • Typical runtimes of 1h20 at 2100 Lumens, 5h at 675 Lumens, 3 days continuous running at 125 Lumens
  • Intelligent LED and battery protection
  • 2 hours charge time
  • Blinky mode
  • Low battery warning
  • Single bar mounting lamp unit, cable design
  • Very rugged and weatherproof
  • Scratchproof, toughened glass lens
  • Manufactured in the UK
    Mtbr Bike Lights Shootout - over 50 bike lights reviewed, photographed and measured here.
  • Full Beam Fusion Pro Review

    Holy moly, a self-contained light arrived from the UK from a brand new company. It must be a good day. Prior to this, I did a lot of riding with the Lupine Wilma TL and the the Exposure MaxxD both reviewed on this light shootout. This category of High End self contained bike flashlights is the most exciting today as the latest LEDs are crammed into one case with the highest quality batteries available. The rider is left with a small light with no wires that puts out about as much light as a car headlight. Continue reading →

    There have been no reviews posted yet for this product. Be the first by clicking Submit a Review

    X-Fusion Vengence Woes

    I've owned my X-Fusion Vengence HLR DLA fork for over nine months now, and I'm still having trouble figuring out the adjustments. With a low enough air pressure (lower then recommended for my riding weight), and with the low-speed compression damping almost all the way open, the fork behavies wel ... Read More »

    Fox RP23 vs X-Fusion 02 HLR.. any opinions

    Seen some good reviews on the Fox unit but not a lot on the X-Fusion (not including their old HL model), so I was wondering if anyone has had the pleasure of riding both and is willing to share an opinion.. Cheers..Read More »

    X-Fusion O2 - require a shim?

    Hey folks, Running an X-Fusion O2 on a Mojo SL and am curious about trying a 650b setup. Tons of info on Mojo conversions using Fox, but I can't find anything on doing this with the X-Fusion rear shock. Has anyone tried this?Read More »

    Spring for my X-fusion Vector RC

    I currently have a 400 lbs spring rate on my DH Aurum. I didn't weight myself with all gear but I'm pretty sure I can top 210lbs easily. I rode with it for a while now and to get a decent sag on the rear shock, I need to preload it to the max (per x-fusion recommendations, about 6 turns). Still, I f ... Read More »

    X-Fusion Vector Air HLR

    I quick update on the Vector air shock I am running in my trail bike. Simply put the best shock, air or coil, out there I have tried. (NOTE: have not tried the DB Air) I have run Manitou Swinger, Marz Air, Fox RP2, RP23, RP23 Tuned, RS Monarch Plus RC3 and finally now am running the Vector ... Read More »

    Read More »




    Interbike Featured Booths

    Check out the hottest mountain bike products from these brands!

    See All Interbike Coverage - Click Here »


    MTBR on Facebook