Pedros Chain Keeper Extras

0/5 (0 Reviews)
MSRP : $9.99


Product Description

Simple, easy to install device for protecting chains and frames when rear wheel is removed (during repair or transport).

There have been no reviews posted yet for this product. Be the first by clicking Submit a Review

5 Spot chain keeper mod.

I had a narrow/wide ring, that worked well till it wore down, so I put on a keeper: [url=http://www.origin8.bike/product-description/?prod_model_uid=7181]Product Description | Origin8[/url] But It wouldn't go low enough because of the BB gusset. I noticed I also lost the bottom 1/4" of shoc ... Read More »

Chain guide/catcher/keeper/thingamajig

I'm building up a cross bike and decided to go 1x8 (39x11-28). The frame is a NOS '07 Jamis Supernova and it has a front derailleur pulley right at about the same height as the 39t chainring which would interfere with a 3rd Eye Chain Watcher or N-Gear Jumpstop. I was having a hard time with the pr ... Read More »

K-Edge MTB Dirt 3 chain keeper

Anybody used one of these? Does it work. Just looking for piece of mind when dropping to the small ring. Thanks. Specialized Epic 29 Intense Tracer 29Read More »

Chain Keeper

I have a 2012 Trek SF100 al and I am looking for a chain keeper that will work with the BB95 integrated bottom bracket, or a seat tube type that will fit the 36.2mm tube. Suggestions.Read More »

home made direct mount chain keeper - SB 66

I'm running a 2x10 and would like to go 1x10 with a bash guard. I'm already using a bionicon device to reduce chain slap on the bottom. I'm thinking of getting a piece of kydex and forming up a guide similar to the one below, but direct mount. The design would be very simple b/c the mounting brac ... Read More »

Read More »



 

INTERBIKE

Contests





Interbike Featured Booths

Check out the hottest mountain bike products from these brands!



















See All Interbike Coverage - Click Here »

   

MTBR on Facebook